How To Use Wine Ubuntu? (Solution found)

Here’s how:

  1. Click on the Applications menu.
  2. Type software.
  3. Click Software Updates.
  4. Click on the Other Software tab.
  5. Click Add.
  6. Enter ppa:ubuntu-wine/ppa in the APT line section (Figure 2)
  7. Click Add Source.
  8. Enter your sudo password.

Contents

How do I use Wine software in Ubuntu?

Installing Windows Applications With Wine

  1. Download the Windows application from any source (e.g. download.com). Download the.
  2. Place it in a convenient directory (e.g. the desktop, or home folder).
  3. Open the terminal, and cd into the directory where the. EXE is located.
  4. Type wine the-name-of-the-application.

Is Wine good for Ubuntu?

Yes, installing Wine itself is safe; it’s installing/running Windows programs with Wine that you have to be careful of. regedit.exe is a valid utility and it’s not going to make Wine or Ubuntu vulnerable on its own.

How do I run Wine on Ubuntu 20?

How to Install Wine on Ubuntu 20.04 LTS

  1. Check installed architectures. Verify 64-bit architecture.
  2. Add the WineHQ Ubuntu repository. Get and install the repository key.
  3. Install Wine. The next command will install Wine Stable.
  4. Verify the installation succeeded. $ wine –version.
  5. Configure Wine.
  6. Two simple tests.

How do I use Wine emulator?

Installing programs on Wine

  1. Download the application (or sync via the cloud) to your Android device. Take note of where you save it.
  2. Open the Wine Command Prompt window.
  3. Type the path to the location of the program.
  4. To run the file in Wine for Android, simply input the name of the EXE file.

How do I use Wine in command prompt?

Run Wine using the wine path/to/appname.exe command. The first command you will run will be to install an application. Typically something like wine /media/cdrom/setup.exe or the equivalent path might be used to install an application from CD.

How does Wine on Linux work?

If your Windows program makes calls that Linux can handle, then Wine passes them on to the Linux kernel. If the program wants to do something that Linux can’t do, then Wine translates the call into something that Linux can deal with first.

Is Wine a security risk?

Wine is a popular compatibility layer for running Windows programs on Linux. The level of security risk that Wine poses to Linux users is largely undocumented. However, certain API calls could not be recreated in a Linux environment, and led to failure of malware to execute via Wine.

Is Wine stable for Linux?

64-bit applications As of April 2019, the support is considered stable. The two versions of Wine are built separately, and as a result only building wine64 produces an environment only capable of running x86-64 applications.

Should you install Wine on Linux?

Using Wine, your Windows software or game should run on your Linux desktop in much the same way as it would natively on Windows. It isn’t a perfect solution, so if you run into difficulties, check the Wine application database listing for your game or software to find further advice.

How do I open Wine config?

Different distributions and desktop environments handle WINE and WINE applications differently, so the easiest way to open it up on any distribution is to run winecfg in a terminal. When the application opens, you will notice a plain window with seven or eight tabs, depending on which version of WINE you’re running.

How do I know if Wine is installed on Ubuntu?

You could simply type in wine –version in a terminal window.

Can Wine run arms?

Eltechs’ ExaGear RPG ([1]) allows x86 applications to run on Android using wine.

What programs work with Wine?

WIth Wine, you can run programs such as MS Office, Windows Media Player, Adobe Photoshop, Max Payne, and several other games and applications.

Does Wine have a GUI?

Wine can now setup its own environment automatically, and Winecfg has now replaced the other limited configuration that winesetuptk allowed. A graphical user interface for the WINE emulator. It provided an interface for configuring and running MS-Windows applications.

How To Run Windows Software on Ubuntu with Wine

Despite the fact that Linux is a fantastic operating system, its software catalog sometimes be inadequate. For those who can’t live without their favorite Windows game or application, Wine allows you to run it directly on your Ubuntu desktop. Wine is still a work in progress, so it won’t run every application properly — in fact, some apps may not function at all — but it’s getting better all the time. This Wine beginner’s tutorial will get you up and running with the program quickly and easily.

Wine Application Database

Due to the time-consuming nature of determining if a program will function with Wine and the process of altering it to make it work, the Wine project provides an application database known as the Wine AppDB to aid in this process. Search for an application in the database to view ratings, comments, tips, tutorials, and adjustments left by other users who have used the program. Programs with a platinum rating work flawlessly with no changes necessary, but applications with a trash rating do not function at all.

Installing Wine

Wine may be found at the Ubuntu Software Center, which is a great place to start. It is possible to download both stable and beta versions; in this case, version 1.2 is stable and version 1.3 is beta. The stable version has been more thoroughly tested – occasionally a regression in the beta version might cause a program to cease operating, but other apps will only operate with the newer, beta version, which is why the stable version is recommended. The entry for an application in the Wine application database may contain information on the version of Wine that you’ll need to run the program in question.

Running an Application

Once you’ve installed Wine, you may download an application’s EXE or MSI (Microsoft Installer) file and double-click it to launch it, exactly as you would if you were using Windows. This isn’t always the most efficient method of running a program. To examine detailed error messages when a program is having a difficulty, you may run the application from the terminal. This will allow you to diagnose the problem more effectively. The following command will suffice:wine application.exe (path to application executable).

For example, thefixmemessage in this case informs that Wine does not yet support a certain function, but the program continues to work normally in the absence of this support.

The shortcuts to it will appear in your programs menu, and they may also appear on your desktop when it has been installed.

Wine’s Utilities

Several utilities are included in the Wine installation package, which may be accessed through the applications menu. To find them, just put the word Win into the application’s search bar. Wine’s setup dialog box provides a number of settings, some of which you may find necessary in order to get programs to run properly under Wine. You may configure Wine to operate as a certain Windows version, or you can configure specific Windows versions for each individual application. Graphics, music, and theme customization options are also available.

Winetricks, an assistance script that automates a number of operations, is also included in the bundle. Winetracks can assist you with the installation of several popular programs and games; however, not every compatible application is included here.

The RegistryFile System

Many apps, in order to function correctly, need registry modifications. On the application database, you’ll frequently find information on which registry entries to edit and how to do so. To access Wine’s registry editor, type the regedit command into a terminal window and press Enter. A fake Windows file system, which is kept in the hidden.winefolder in your home folder, is used by Wine to store its files. To make it visible, select View-Show Hidden Files from the file manager’s View menu. Once you’ve done so, you’ll see a folder nameddrive cin the.winefolder — this folder holds the contents of Wine’s C: drive, which you may access by double-clicking on it.

It is not a Windows emulator; rather, it is an implementation of the Windows API for the Linux, Mac OS X, Solaris, and the BSD family of operating systems, among other platforms.

Wine – Community Help Wiki

  • Wine enables you to run a wide range of Windows applications on a Linux operating system. WineHQ.org is the website where you can learn more about it. If you are running the most recent version of Wine, which isv1.6, you may obtain more assistance on thewinehqIRCchannel on irc.freenode.net. They also have an Ubuntu website with installation and build guidance. First and foremost, please assess if you actually need to execute the exact Windows software in question because, in most circumstances, an OpenSourceprogram can provide a similar functionality. You should also consider using Qemuinstead of Wine if you require a complete Windows installation.

Ubuntu versions of Wine (Recommended)

  • Start by going to the software center. Install ‘wine’ by typing it in the search box.

Newer versions of Wine (Not Recommended)

Wine development versions are available via the Wine Ubuntu repository, which is updated on a regular basis. To include the repository in your software sources, do the following steps:

  1. The following commands: sudo apt-key add winehq.key
  2. Sudo apt-add-repository’winehq.key Remember that these are development packages (i.e. beta software), and that they may have regressions and other issues that are not present in the stable version of Wine that is included with Ubuntu, so proceed with caution. Unless the current stable version of Wine does not support or is incompatible with the program you desire to use, it is recommended that you refrain from using them. If you are running an earlier version of Wine and would like to receive help from WineHQ, you will need to first upgrade to the most recent development version. Instead of using Launchpad, please post any linked Wine issues on the WineHQBugzilla Page rather than in Launchpad. Thanks! Before you can use Wine, you must first establish a bogus C: drive on your computer, where your Windows software will be installed. This may be accomplished by entering the following command into the terminal: In order to access the terminal, navigate to Applications – Accessories -Terminalwinecfg. A second method of customizing Wine is through the Configure Wine option, which can be found under the Applications-Wine menu. In your home directory, a hidden folder (.wine) will be created, which will include the fictitious C: drive, as well as registry files that are identical to those used by Windows. The Wine Configuration Window will display as soon as this directory has been established. It is possible to change a number of Wine parameters, including the Windows version that is emulated, disk mappings and DLL overrides, as well as settings related to a given program, in this window. In order to close the window, click theOkbutton. These are the steps to take in order to install Windows apps with Wine:
  1. You can get the Windows application from any source you want (e.g. download.com). Download the.EXE (executable) file and run it. Place it in a suitable location (for example, on the desktop or in the home folder)
  2. Open a terminal window and navigate to the directory where the.EXE file is stored. Wine of a certain type (for example, wine realplayer installer.exe)
  3. The-name-of-the-application-extension (for example, wine realplayer installer.exe)
You might be interested:  How Many Bottles Come In A Case Of Wine? (TOP 5 Tips)

This will launch the.EXE program with the use of Wine. If it is an installation, it should proceed to execute in the same manner as it would in Windows. If the application prompts you for a directory in which to install the application, choose C:Program Files as the location for the installation. Following the installation of an application according to the instructions above, such apps may be launched and utilized by typing wine programname.exe into the command line (e.g.wine realplayer.exe).

  • Wine will automatically locate and launch the installed executable, which will be located at/.wine/drive c in the virtual Windows drive that was created by Wine.
  • Wine file browser may also be accessed through a terminal by typingwinefile in the command line.
  • In the Wine file browser, double-clicking an executable file will cause it to be loaded and launched in Wine.
  • Create a launcher by selecting “Create a launcher” from the context menu of the desktop.
  • To run the software, write inwine the-location-of-the-program.exe (for example, wine /home/john/.wine/realplayer.exe) in the command line.
  • Just make sure that “Run in terminal” is not selected.
  • In certain circumstances, the program must be executed from a specific location in order to function properly.

If you want an icon to appear on the panel, you need construct a launcher on the panel of your choosing.

Instead, you may configure wine to open.exe files for you, saving you the trouble of having to locate the file each time.

This may be accomplished by right-clicking on the.exe file, selecting Properties, and then choosing the Open With tab.

Fill in the blanks with the word wine on the line that displays, then click Add and Close.

Start by opening a terminal window and entering the command listed below.

Running uninstall apps directly through Wine should also be a successful endeavor.

The disadvantage of this procedure is that it is not as clean as using an uninstaller, which will not erase the program’s configuration from the Wine registry as it would if done on Windows. Winecfg can be found on the command line or in the Run Application menu.

Adding CD and DVD drives to Wine

In winecfg, go to thedrivestab section. Select Autodetect from the drop-down menu. If you discover that this does not function properly for you, then follow these instructions:

  1. Winecfg has a drivestab option. Select Autodetect from the drop-down menu. Follow these steps if you notice that this does not operate correctly for you:

If you have more than one CD/DVD player, you will need to give each one a unique identification number. If you have more than one CD/DVD device, use /media/cdrom0 for the first one, /media/cdrom1 for the second, etc. If you’re still not sure, try typing the following command into your terminal. ls -la /.wine/dosdevices/ /.wine/dosdevices/ What this command will do is verify the CD/DVD device information you have once Wine has been installed. Checking that the application runs successfully before creating the menu entry to start the new Windows program from the command line is an useful step to follow before creating the menu entry.

wine In this case, the command would be “C:PATHTOPROGRAMProgram.exe” For example, the command would be “C:Program FilesWorld of WarcraftWoW.exe” Following your confirmation that you have the necessary information, proceed with the standard menu editing procedure to create a new entry.

Bring the new entry to a close and save it.

Changing application specific settings

  1. In your terminal, enter the following command. winecfg
  2. Select “Add Application” from the drop-down menu. Navigate to the location where the.exe file is located and select that application
  3. At the bottom of the page, you may select the version of Windows Wine to simulate using the dropdown menu. As a result, any modifications made to the Libraries and Graphics tabs will only have an impact on the program that is now selected in the Applications page.

Using Windows Themes/Skins In Wine

With this Terminal command, you may modify the color palette of wine to more nearly resemble the colors of Ubuntu’s default theme. gedit /.wine/user.reg gedit /.wine You may also wish to use this command in the console to generate a backup copy of your data in your Home folder. cp /.wine/user.reg/Replace thesection with the following: 1176981676 “ActiveBorder”=”239 235 231” “ActiveBorder”=”239 235 231” “ActiveBorder”=”239 235 231” “ActiveTitle”=”203 133 61” “ActiveTitle”=”203 133 61” “AppWorkSpace”=”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 191″>”198 198 “Background”=”93 77 52” “ButtonAlternativeFace”=”200 0 0” “ButtonDkShadow”=”85 85 82” “ButtonAlternativeFace”=”200 0 0” “ButtonAlternativeFace”=”200 0 0” “ButtonFace”=”239 235 231” “ButtonFace”=”239 235 231” “ButtonFace”=”239 235 231” “ButtonFace”=”239 235 231” “ButtonHilight”=”255 255 255” “ButtonLight”=”255 255 255” “ButtonLight”=”255 255 255” “ButtonShadow”=”198 198 191” “ButtonText”=”0 0 0” “ButtonStyle”=”198 198 191” “GradientActiveTitle”=”239 235 231” “GradientActiveTitle”=”239 235 231” “GradientInactiveTitle”=”239 235 231” “GradientInactiveTitle”=”239 235 231” “GradientInactiveTitle”=”239 235 231″ GreyText=”198 198 191” is defined as follows: “198 198 191.

246 200 129″ “Highlight”=”246 200 129” “HilightText”=”0 0 0” “HilightText”=”0 0 0” Its “InactiveBorder” and “InactiveTitle” are both 239 235 231 and 239 235 231.

Using Theme/Skins

Wine includes some rudimentary support for Windows theme/skin files in the “msstyles” format, but it does not go beyond that. Deviant Art has a wide collection of artworks based on these subjects. To make use of them, you must first create a folder on Wine’s virtual Windows disk and then instruct Wine to utilize the theme in that folder. To begin, navigate to Wine’s virtual drive, which is often located in your Home folder as “.wine/drive c” (this is hidden, you may need to select View- Show Hidden Files in the file manager).

Go to this newly created folder and create a new folder named “Themes.” Creating a folder for each theme you desire and placing the files ending in “.msstyles” right into each folder should be your first order of business.

winecfg In the setup box, click on the tabDesktop Integration to begin configuring it.

After picking a theme, clickApplyat the bottom to see how it appears (they don’t always display properly), then if you are satisfied with the result, click OK and you’re finished!

Fullscreen issues with overlapping Panel

For Windows theme and skin files in the “msstyles” format, Wine provides rudimentary support for the file type. Deviant Art has a wide collection of artworks with these subjects. Creating a folder on Wine’s virtual Windows drive and instructing the program to use the theme are the first steps in using them. In order to begin, navigate to Wine’s virtual drive, which is often located in your Home folder under the directory “.wine/drive c” (this is hidden, you may need to select View- Show Hidden Files in the file manager).

Make a new folder called “Themes” in this newly created folder.

Example: The entire path to a theme file named sample.msstyles may be “/home/username/.wine/drive c/windows/Resources/Themes/Sample/sample.msstyles.” The full path to a theme file named sample.msstyles might be “/home/username.wine/drive c” To inform Wine to utilize your theme, execute this command in the terminal one more.

winecfg Select the Desktop Integration tab in the setting window.

then uncheck theTheme:box, which should now have your theme listed in the drop-down menu of the theme selection box. After picking a theme, clickApplyat the bottom to see how it appears (they don’t usually display properly), then if you are satisfied with the result, click OK and you’re finished.

Wine provides some rudimentary support for Windows theme/skin files in the “msstyles” format, although it is not comprehensive. Deviant Art has a vast number of works that are based on these subjects. To make use of them, you must first create a folder on Wine’s virtual Windows disk and then instruct Wine to utilize the theme included within it. To begin, navigate to Wine’s virtual drive, which is often located in your Home folder under the name “.wine/drive c” (this is hidden, you may need to select View- Show Hidden Files in the file manager).

Then, inside this new folder, create a new folder named “Themes.” Creating a folder for each theme you desire and placing the files ending in “.msstyles” right into each folder should be your first step.

To inform Wine to utilize your theme, run the following command in the terminal once again.

then uncheck the Theme:box, which should now have your theme listed in the drop-down menu.

Error: Cannot change screen BPP from 32 to XX

It appears that the Ubuntu Karmic Wine(v1.0.1) registry has been incorrectly set to utilize the ActiveX component dhtmled.ocx in this version of the operating system. This might result in an error message such as “Component ‘dhtmled.ocx’ or one of its dependencies not successfully registered: a file is missing or incorrect” in some applications. As a result, we must tell Wine where to look for this file. 1. Save the following registry file to your computer: 3. Import the registry settings that were downloaded earlier.

  • Import registry file- open the /ieslinux-dhtmledit.reg file from the command line

Screen flickers to black when starting an application

In certain cases, this is caused by a fault with the video driver’s ability to handle XRandR properly. On order to determine whether or not there is a problem with XRandR, enter the command:xrandr in a console. If your screen goes blank while you’re performing that command, it’s possible that this is the problem. This problem may be avoided by configuring Wine such that it does not make use of XRandR. To do so, follow these steps:

  1. Select “HKEY CURRENT USERSoftwareWineX11 Driver” in the Wine’s Registry Editor, and then press “Enter.” It is possible that you will need to create an X11 Driver. Create a new key called “UseXRandR” and set it to the value “N” in the registry.

See Wine Bug 15214 and the Wine Wiki pageUsefulRegistryKeys for further information.

  • The following topics are covered: games
  • AdobePhotoshop—a tutorial for operating CS4 on WINE

How to Install and Use Wine to Run Windows Applications on Linux

Back in the mid-1990s and early 2000s, Linux was a fledgling operating system that suffered from a significant shortage of effective applications due to the fact that it was a young operating system. When it came to business, this was a more pressing problem, since Windows desktop programs could make or break a company’s ability to be productive. In order to circumvent this shortcoming, a compatibility layer known as WINE was developed. Wine Is Not an Emulator was the original meaning of the phrase (because everyone mistook the tool for a Windows emulator).

  1. Wine’s main contribution was to make it possible for Windows applications to run on the Linux operating system.
  2. Whatever program you needed to use, such as Notepad, a calculator, or solitaire, you could find it.
  3. Over time, more and more programs were added to the Wine library, and the program eventually became a must-have tool for many individuals and enterprises (and especially Linux gamers).
  4. Despite the fact that the majority of Wine’s effort is centered on games, there is still a substantial number of productivity applications accessible.
  5. That would be a wrong assumption to make.
  6. I’m not sure what that means exactly.

To make things simpler, let’s walk through the steps of installing Wine and then installing and running a Windows program through the use of the application. Using the Elementary OS Freya, I will demonstrate how to install the most recent version of Wine and show you how to do so.

Installation

If you’re using an Ubuntu derivative, you’ll find Wine in the Software Center of your operating system. However, it’s likely that the version you’re looking at is out of date. As a result, we do not wish to install the “out of the box” version of the software that is provided. In order to accomplish this, we must include the official Wine repository. This can be accomplished in one of two ways: through the command line or through a graphical user interface (GUI). Because our purpose is to execute Windows applications, we will employ the graphical user interface (GUI).

  1. Enter “software” in the Search box and then click SoftwareUpdates
  2. Then click OK. Select the Other Software option from the drop-down menu. To add a package, select Add Package
  3. Then type ppa:ubuntu-wine/ppa in the APT line area (Figure 2). Select Add Source from the drop-down menu. Fill up the form with your sudo password
  4. Click Authenticate
  5. Then click Close
  6. And then click Authenticate again. When asked, press the Reload button. Start by going to the Software Center. Go on a search for wine
  7. Wine should be chosen and then installed
  8. Allow time for the installation to be completed
  9. And
You might be interested:  How To.Open A Wine Bottle Without A Corkscrew? (TOP 5 Tips)

That’s all there is to it. Wine is now ready to assist you with the installation and operation of Windows-based apps. Keep in mind, however, that not every application will be successful. Almost all of them will, but if you’re trying to get your in-house, proprietary solution up and running, you could run into some difficulties.

Installing and running an app

Let’s install Notepad++, which is a highly popular programmers’ notepad. In order to avoid installing third-party applications, you should download the file from a source that does not provide such alternatives (which can cause the application installation to fail). Download the Notepad++ installation from Filehippo to be on the safe side. In your Downloads directory, you’ll locate the Notepad.exe executable file. Right-click on the file and select Open with Wine Windows Program Loader from the context menu (Figure 3).

  1. This may take some time, depending on how fast your system is running at the moment.
  2. Continue with the installation by clicking Next and following the prompts.
  3. Like Windows, Linux does not have a C drive, unlike the latter.
  4. No.
  5. There are three well-known sub-folders included within that folder: C drive is, as you might think, the primary drive.
  6. You will eventually reach the section of the installation where you will select the components you want to use (Figure 5).
  7. It is possible that you will wish to pick Create Shortcut on Desktop if your desktop environment supports desktop icons (and this is your preferred method of launching apps).

The installation process will be completed, and you will be presented with the Finish screen.

Notepad++ will be launched (Figure 1).

This is one issue that might easily cause confusion for consumers.

In that folder, you’ll find a folder named Notepad++, which includes the notepad++.exe program, which you may run.

Notepad++ will be launched if you right-click the file and choose Open with Wine Windows Program Loader from the context menu.

Depending on how difficult the application is, your results may differ.

Every application shows the version of Wine that was tested, whether or not it installs, whether or not it runs, and a rating. There are a number of them:

  • Platinum-level applications are those that work flawlessly right out of the box. Applications that can be executed with some adjustments are considered gold. Silver: Applications that run with minor faults that do not interfere with their functionality.

You will also see certain applications marked as Garbage, which indicates they will not be able to be installed or executed. If you have a Windows application that just does not have a Linux counterpart, do not be concerned: Wine is there to help you. Despite the fact that not every Windows application will run under Wine, the number of applications that do is rather amazing. And, given that almost everything we do these days is done through a web browser, with a little help from Wine, you should be covered from every perspective.

How to Use Wine on Linux

Documentation Download Documentation Download Documentation This wikiHow shows you how to install and use the Wine winery software on a Linux machine. Wine is a tool that allows you to execute Windows applications on a machine that does not have a Windows operating system.

  1. 1 Start by launching the Terminal. To do so, go to your computer’s Menu or Applications list and choose theTerminalapplication from there.
  • When using most Linux distributions, you may also open the Terminal by using the keys Ctrl, Alt, and T. Some Linux distributions additionally provide a command line textbox at the top of the screen
  • These are known as terminal emulators. In certain Linux configurations, the command line is the first thing that appears. If such is the case, you can skip this step
  • Otherwise, continue.
  • 2 Enable 32-bit architecture on your computer. If your computer is equipped with a 64-bit CPU, you’ll need to configure your computer to operate in 32-bit mode. In order to accomplish this:
  • Enter the command sudo dpkg -add-architecture i386 into the Terminal window and click Enter. When asked, enter your root password and hit the Enter button.
  • 3 Navigate to the Wine website using your computer’s downloader. As a result, your computer will be able to locate the appropriate download files. In order to accomplish this:
  • When requested, type inwget -nc and press Enter
  • When prompted, type insudo apt-key add Release.key and press Enter
  • When prompted, enter your root password
  • 4
  • 5Update the packages that have been downloaded. Enter the command insudo apt-get update and press Enter
  • 6 Choose a download from the drop-down menu. After typing insudo apt-get install -install-recommends wine-stableand clicking Enter, you will be able to download the stable version of Wine, which was released in March 2018.
  • There may be future Wine versions that enable a variety of various forms of stable downloads
  • However, this is unlikely.
  1. 7Confirm that the download was successful. When asked, enter iny and click Enter. If prompted again, fill in your root password. Wine will begin to download and install into your machine at this point. 8 Wait for the download to be completed. Depending on your machine, it might take up to ten minutes to complete the installation. As soon as the download is complete, you may proceed.
  1. 1 Create a home directory in your Windows operating system. Press Enter after typing inwinecfg and look for a confirmation message that says something like “generated the configuration directory ‘home/name/.wine'”
  • If you are requested to install any missing packages in this location, clickInstall in the prompt window and wait for the packages to be installed
  • If you are prompted to install any missing packages elsewhere, clickInstall in the prompt window and wait for the packages to be installed
  • 2 Select a Windows operating system. The “Windows Version” drop-down box is located at the bottom of the “Wine configuration” window
  • From there, select the version of Windows (for example, Windows 7) that you wish to use.
  • First, if you don’t see this option, click on theApplicationstab, which is at the top of the window.
  • First, if you don’t see this option, click on theApplicationstab, which is at the top of the window
  • On the Wine website, you can find a full list of programs that are Wine-compatible.
  1. 1Go to your Downloads folder and double-click it. In most cases, you’ll find it in your Home folder, however you may also be able to access it through the Applications menu. 2Look for the EXE file that was downloaded. Select the software that you wish to install by scrolling through the Downloads folder until you locate the EXE file for it. 3Right-click on the file to open it. A drop-down menu will appear as a result of this action. 4 Select “Open With Wine Windows Program Loader” from the drop-down menu. It’s located at the very top of the drop-down list. A window for installation will be opened as a result of this. ClickInstall. It may be found near the bottom of the installation window, on the right-hand side. The application will begin to install on your computer at this point.
  • Some programs may need the entry of additional information before they can be installed. You may also alter the place in which your software is installed by selecting a different folder on your computer from the drop-down menu on the right side of the window.
  1. 6When asked, select Close. When the software has completed its installation, this option will become available. 7 Start your program and see what happens. Alternatively, you may launch your freshly installed software from the Applications area, which is often located inside the Menu

Create a new question

  • Question What exactly is wine? What is the purpose of using Wine? What is the best place to utilize Wine? Answer from the 77EcrivanCommunity Wine is a compatibility layer that enables you to execute Windows applications on a variety of operating systems, including Linux, MacOS/OSX, and BSD computers. In the case of GNU/Linux, it’s clear that Linux distributions aren’t as extensively supported as Microsoft Windows operating systems. This makes it extraordinarily easy to be able to execute Windows software in the manner in which Wine allows
  • Question What is the best way to run.jar files on Linux Mint? To begin, open up Terminal and type in “sudo apt install default-jre” into the command prompt. Once the file has been downloaded, use the command “cd” to browse to the folder where your.jar file is located. It’s as simple as typing “java -jar JavaFileNameHere.jar” and you’re done
  • Question Is it possible to run any Windows-based software on Linux using Wine? In most cases, Wine will not be able to execute every Windows-based program. You may view a list of Windows applications that are compatible with Wine by visiting the Wine AppDB website. Question I have Wine installed on my computer. There is no such choice to install a software with Wine when I right click on a program as shown in the screenshot in this post when I right click on it. When I choose ‘Open with another program’ instead, Wine is not shown as a possible option. Why? What exactly went wrong? If the choice does not appear in the drop-down menu, you will need to utilize the terminal. Open the terminal by using the keys CTRL + ALT + T. Fill in the blanks using the following command: /usr/bin/wine-stable FILE.exe. FILE should be replaced with the actual name of the executable file. If you run this terminal command, it should behave just as if you had selected the option by clicking on it.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. Submit

  • A Wine user interface called PlayOnLinux, which allows you to install, uninstall, and access Wine apps, may be installed on your computer. To do so, just open Terminal after installing Wine and write insudo apt install playonlinux, followed by your password and the letter iny to confirm that the download was successful. Keep checking the Wine website for changes on a regular basis.
  • Despite the fact that Wine is a reasonably extensive compatibility tool, it will still have difficulties running high-end PC games and apps at a regular frame rate

About This Article

The writers of this page have together authored a page that has been read 580,562 times.

Is this article up to date?

Users had several difficulties when Linux was originally published since it lacked many of the programs that were effectively developed in Microsoft Windows at the time of its debut. As a response, Linux developed Wine, which is a compatibility layer that allows Windows programs to operate on Linux operating systems. Wine could initially only run a small number of Windows programs, but it now has the ability to run hundreds of them, making it a highly adaptable Linux system. As a result of the complexity of bringing such a technology to life, you may think that Wine would be difficult to install and use.

To make the accessibility layer as user-friendly as possible, Wine’s developers went to tremendous efforts to ensure that it met their requirements.

Installation:

The following command may be used to determine if your system is using a 32-bit or a 64-bit CPU: first, determine whether your system is using a 32-bit or a 64-bit processor. Wine may now be installed in a systematic and straightforward manner by using the standard Ubuntu repository. We may install it by running the following command on our computer: Another method of installing it is to download and install the WineHQ repository’s basic Wine packages on your device, which may be found here. Before downloading a 64-bit version, use the command below to convert the system to an i386-based architecture first.

Now, choose one of the two commands below to install either the Stable version or the development version, as appropriate: Using $sudoapt-get installwine-stable-y, you may install wine in a stable state.

You might be interested:  What Wine Goes With Tacos?

Taking a look at the package listings.

Done It was decided that the following packages will be automatically installed and so no longer needed: fonts-wine gem gem-doc gem-extra gem-plugin-gmerlin gem-plugin-lqt gem-plugin-magick gem-plugin-lqt gem-plugin-magick gem-plugin-v4l2gir1.2-gst-plugins-base-1.0gir1.2 gem-plugin-v4l2gir1.2 -gstreamer-1.0grilo-plugins-0.3 -base -gstreamer-1.0grilo-plugins-0.3 gstreamer1.0-gtk3 libcolamd2 libdazzle- 1.0 – 0libdca0 libdazzle- 1.0 – 0 the libe-book- 0.11 – 1 the libepubgen 0.11 – 1 the libfreerdp-client2- 2 the libfreerdp2- 2 the libftgl2 the libgavl1 the libglew2.0 the merlin-avc1 merlin-avc1 merlin-avc1 libgom-1.0-0libgpod-common libgpod4 libgom-1.0-0 Lirc-client0, libmad0, libmagick++, 6.q16, 7, and libmjpegutils, 2.1, and 0libmjpegutils, 2.1, and 0libqqwing2v5, libquicktime2, librsync1, and libsdl-ttf2.0, and 0libsgutils, and 2libsuiteparseconfig5, and 0libvncclient1.

libwine-development two libraries: libwine-development:i386 and libwinpr2-libxapian30 linux-hwe-5.4 -headers-5.4.0- 42lp-solve media-player-info linux-hwe-5.4 -headers-5.4.0- puredata-core puredata-dev puredata-doc puredata-extra puredata-utils puredata-utils python3-makopython3-markupsafe torsocks development:i386 wine32-development:i386 development:i386 To get rid of them, run the command’sudo apt autoremove’.

The following extra packages will be installed on top of the existing ones: The following libraries are installed: libegl-mesa0:i386 libegl1:i386 libfaudio0 libfaudio0:i386 libgbm1:i386 libwayland-client0:i386 libwayland-cursor0:i386 libwayland-egl1:i386 libwayland-server0:i386 libxcb-xfixe NEW packages will be installed, including the following: The following libraries are installed: libegl-mesa0:i386 libegl1:i386 libfaudio0 libfaudio0:i386 libgbm1:i386 libwayland-client0:i386 libwayland-cursor0:i386 libwayland-egl1:i386 libwayland-egl1-mesa:i386 libwayl Upgraded, 19 freshly installed, 0 to delete, and 52 not upgraded are all possible options.

  • When prompted with a Y or n choice for downloading, select Y.
  • Now, to check the installation, simply input the following: Despite the fact that we have successfully installed Wine, we must first learn a few fundamental concepts and how to configure Wine for usage before we can begin installing the program in Wine.
  • Consequently, Wine simulates a “C:” disk on your computer.
  • First and foremost, we must create a wine prefix.
  • Install Gecko by selecting Install from the drop-down menu, and you’re good to go.
  • You have the option of changing the configuration settings, or you can leave it as is for the time being and shut it.
  • We have the ability to manually create and maintain a number of wine prefixes.
  • When you’re finished, click the Ok button.
  • You may see a list of all the most recent Wine-sponsored applications on the official Wine website.

Take a look at the list of available support programs to determine if any of them are a good match for Wine. Indication of this is provided by the Rating score, which runs from Platinum to Garbage. You will also be able to see which version of Wine was used to evaluate the programs.

Usage

Let’s see if we can get a Windows application to run on our Ubuntu PC using Wine. In this example, we will make use of Windows Media Player, which has been a popular media player for playing back media files on Windows operating systems for many years. To begin, download the “.exe” file from the website. Once it has been downloaded, navigate to the downloads folder, right-click on the “exe” file, and select “Open with”, “Wine Windows Programs loader” from the context menu. In addition, we will be requested to begin the installation procedure without any problems.

Conclusion

When it comes to running Windows programs on Linux computers, Wine offers a number of advantages over emulators or virtual machines. Unlike other items, wine is not susceptible to the output deterioration that occurs while mimicking them. Furthermore, it is not required to be opened prior to executing a Windows program. Wine’s developers have spent a significant amount of time and effort making the accessibility layer as user-friendly as feasible.

About the author

A security enthusiast who enjoys using the Terminal and using open source software. Python, Linux (Debian), Bash, penetration testing, and firewalls are some of the technologies in which I am proficient. I was born and raised in Wazirabad, Pakistan, and am presently pursuing my Undergraduate degree at the National University of Science and Technology in Islamabad, Pakistan (NUST). On Twitter, my handle is @UsamaAzad14.

How to Install and Use Wine on Ubuntu 20.04 and 21.04

A security enthusiast who enjoys using the Terminal and using open source programs. Linux (Debian), Bash, penetration testing, and firewalls are among the technologies in which I have particular proficiency. “I was born and reared in the Pakistani city of Wazirabad. At the moment, I am pursuing my undergraduate degree at the National University of Science and Technology” (NUST). Usama Azad14 is my Twitter handle.

Prerequisites

  • Ubuntu 20.04.2.0 Long Term Support (Focal Fossa) Whether to use a server or a desktop computer
  • Having root access or Sudo user credentials is required. It is necessary to have Git installed on your server. wget or curl should be installed.

Check and make sure your Ubuntu 20.04 operating system is up to date. sudo apt-get upgrade execute apt upgrade with the —y option. Make sure either curl or wget are installed on your computer. curl sudo apt-get install wget Installing Wine for Ubuntu 20.04 will need you to first activate the 32-bit architecture on your operating system before proceeding with the installation. This is due to the fact that the vast majority of Windows apps are written for 32-bit architecture. The first step is to enable multiarch, which will allow you to install both 64-bit and 32-bit packages on the computer.

Install Wine 5.0

Wine 5.0 is included in the Ubuntu 20.04 Focal Fossa repository, which can be installed using the APT package manager. This is the most popular method of installing Wine. It should be noted, however, that changes to the package manager are quite infrequent. Wine publishes a significant number of development releases each year, thus you will ultimately find yourself behind the times. Type the following command to install Wine version 5 on both 64bit and 32bit systems: wine64 wine32 sudo apt install wine64 wine32 You will receive the following output from the expanded package: sudo apt install wine64 wine32 $ sudo apt install wine64 wine32 Taking a look at the package listings.

Done The following extra packages will be installed on top of the existing ones: fonts-wine gcc-10-base:i386 glib-networking:i386 gstreamer1.0-plugins-base:i386 gstreamer1.0-plugins-good:i386 gstreamer1.0-x:i386 i965-va-driver:i965-va-driver:i965-va-driver:i965-va-driver:i965-va-driver:i96 i965-va-driver:i386 intel-media-va-driver:i386 libaa1:i386 libaom0 libaom0:i386 libapparmor1:i386 libasn1-8-heimdal:i386 libavahi-client3:i386 libavahi-common-data:i386 libavahi-common3:i3 12:i386 libgpm2:i386 libgraphite2-3:i386 libgsm1 libgsm1:i386 libgssapi-krb5-2:i386 libgssapi3-heimdal:i386 libgstreamer-plugins-base1.0-0:i386 libgstreamer1.0-0:i386 libharfbuzz0b:i386 libh I386 libuuid1:i386 libv4l-0:i386 libv4lconvert0:i386 libva-drm2:i386 libva-x11-2 libva-x11-2:i386 libvkd3d1 -0.4-0:i386 libvkd3d1 -0.4-0:i386 libvkd3d1 VKD3D1 is a libvorbis0a:i386 libvorbisenc2 is a libvorbisenc2 is a libvorbisenc2 is a libvorbisenc2 is a libvorbisenc2 is a libvorbisenc2 is a libvorbisenc2 is a library for the libvorbisenc2 is a library for the libvorbisenc2 is mesa-va-drivers:i386 mesa-vdpau-drivers mesa-vdpau-drivers mesa-vdpau-drivers:i386 mesa-vulkan-drivers:i386 ocl-icd-libopencl1 ocl-icd-libopencl1:i386 va-driver-all mesa-vdpau-drivers:i386 mesa-vulkan-drivers:i386 va-driver-all:i386 vdpau-driver-all vdpau-driver-all:i386 wine zlib1g:i386 vdpau-driver-all vdpau-driver-all:i386 To proceed with the installation, press ” Y ” on your keyboard.

In all, it will take no more than 2 to 3 minutes at the most.

The following should be the output:$ wine -versionwine-5.0 (Ubuntu 5.0-3ubuntu1) You have successfully installed Wine 5.0 using Ubuntu’s default repositories, which you can find here. If you’re seeking for a newer version, proceed to the installation step below to get it.

Install Wine 6.0

The instructions below will walk you through the process of installing Wine version 6 on Ubuntu 20.04. This is more recommended because you will be using a better Wine version that will have more features and bug fixes. To begin, you must first get the GPG key for Wine. sudo wget -qO-| sudo apt-key add – sudo wget -qO- You should be able to see the following output: $ wget -qO-| sudo apt-key add -OK After that, you’ll need to install the WineHQ repository. To accomplish this, type the following instructions into your computer: apt-get install software-properties-common sudo apt-get install software-properties-common sudo apt-add-repository “deb$(lsb release -cs) main” sudo apt-add-repository “deb$(lsb release -cs) main” You will receive something similar to this: install-recommends is the recommended option for sudo apt install.

  1. Done Constructing a dependency tree Reading the current situation of affairs.
  2. wine-stable-i386:i386 NEW packages will be installed, including the following: wine-stable and wine-stable-amd64 are both available.
  3. It is need to download 159 MB of archives.
  4. Are you sure you want to proceed?
  5. Following the same procedure as with the previous version 5.0, the installation should take 2 to 3 minutes using the APT package manager.
  6. It’s all right.
  7. In the case of wine, you should see the following output:$ wine -versionwine-6.0.1 Please keep in mind that this version number may vary over time, and that the output shown here is merely an example.

Finalize Wine Installation

To launch Wine, use the command “winecfg” into your Ubuntu terminal’s command prompt. This program will proceed with the installation of Mono and Gecko, as well as the configuration of the Wine environment. To switch from Mono to Gecko Installer, select ” Install ” from the drop-down menu. Once more, select the ” Install ” option to proceed with the installation and complete the process.

Configuring Wine

Following completion of the installation, the Wine setup dialog box will appear for you to complete. In this portion of the software, you may customize the settings for the Wine program.

In the vast majority of circumstances, the default settings should be sufficient. If you do decide to make a change, it will be the Windows version, which will be changed from Windows 7 to something more modern, such as Windows 10. Close the dialogue box when you’re finished.

Example of using Wine to Install Windows App

In a quick example, we will utilize Wine to install the messaging program Telegram, which will be discussed further below. It should be noted that this is available as a native Linux package, but for the sake of this instruction, we will use Wine to install the Windows version on our Ubuntu 20.04 operating system. To begin, download the “Telegram Windows Version”.exe package from the Telegram website. Next, browse to your downloads directory and right-click the.exe file for the Telegram program that we want to install to begin the installation.

  1. Click this to open the Windows program on your Ubuntu 20.04 operating system.
  2. Choose your preferred language and then click “OK.” Following that is the default installation path.
  3. Most Linux-based systems have Windows software installed in the ” /.wine/drive c/ ” directory, which is located in the root of the system.
  4. You can alter the folder in the following step, although most people do not bother with this.
  5. The option to “Don’t create a Start Menu folder” is available if you do not want to create a start menu folder in the first place.
  6. After you have completed this step, you will be presented with the choice to ” Create a desktop shortcut “.
  7. If you do not want this to happen, uncheck the box and click Next.
  8. If you wish to make any changes, now is the time to do so.
  9. If everything goes according to plan, the installation should take less than 10 seconds once completed.
  10. Congratulations, your Wine installation on your Ubuntu 20.04 machine is successful, and you may now install Windows apps.
  11. Please keep in mind that you will need to have Wine permanently installed in order to utilize these apps while they are running on your operating system.

Comments and Conclusion

You have now completed the guide and learned how to install Wine on your Ubuntu-based system, as well as seen a demonstration of how to install a Windows.exe program using Wine on your Ubuntu-based system. Overall, Wine is a fantastic tool that provides some actual benefits to users by integrating Windows and Linux operating systems.

Examples of Wine benefits over Windows:

  • While still utilizing the Windows apps you are accustomed to using, Wine allows you to take benefit of all of the Unix advantages (stability, flexibility, and remote administration). Unix has always made it feasible to develop strong scripts, and this has not changed. Through the use of Wine, it is possible to invoke Windows programs from scripts that can also take advantage of the Unix environment to its full potential. Using Wine, it is possible to access Windows apps from anywhere in the world, even if they are thousands of kilometers distant. In order to utilize thin clients at a reasonable cost, Wine must be installed on a Linux server. Once Wine is installed, you may access these Windows apps from any X terminal. Additionally, Wine may be used to make current Windows apps available on the Web through the usage of VNC and its Java/HTML5 client. Wine is free and open source software, which means you may customize it to meet your specific requirements or have one of the numerous firms do it for you.

If you have any queries, please post them in the comments section below.

Leave a Comment

Your email address will not be published. Required fields are marked *