How Much Wine For 50 Guests? (Question)

  • If you’re set on an open bar, keep in mind how much alcohol you need. Here’s a general rule of thumb for a 4+ hour reception with moderate drinkers. 50 guests 30 bottles of wine 90 bottles of beer 4 bottles of liquor/spirits 100 guests 60 bottles of wine 180 bottles of beer 8 bottles of liquor/spirits 150 guests 90 bottles of wine

Contents

How much wine do I need for a group of 50?

For a 4 hour party with 50 guests, you will need approximately 200 drinks: 80 beers, 72 glasses of wine (15 bottles) and enough for 48 individual cocktails (amounts will depend upon what type of cocktail you serve).

How much alcohol do you need for a wedding of 50?

For every 50 guests, you will need 34 bottles of beer, 7 bottles of wine and 2 bottle of liquor (per hour). For every 100 guests, you will need 67 bottles of beer, 14 bottles of wine and 4 bottle of liquor (per hour).

How do you figure out how much wine to buy for a party?

Wine: A 750-ml bottle of wine contains about 5 servings, so divide the number of wine drinks by 5 to come up with the number of bottles you’ll need.

How many bottles of Prosecco do I need for 50 people?

How many bottles of Prosecco / Champagne for 10 guests: 2 bottles. for 20 guests: 4 bottles. for 25 guests: 5 bottles. for 50 guests: 10 bottles.

How do you figure out how much alcohol to buy for a wedding?

However, as a general, loose guideline, Davila suggests the following ratios:

  1. Beer:.5 beers per guest.
  2. Wine: 1 bottle per 2.5 guests.
  3. Champagne: 1 bottle per 6 guests (toast only)
  4. Liquor: 1 bottle per 5 guests (based on a 3-hour open bar)
  5. After-party: 1.5 drinks per person per hour.

How much should I budget for alcohol at my wedding?

While the average cost of alcohol at a wedding is around $2,500, having drinks at your reception can cost a lot less. The women we spoke to spent half that or less, while still serving up beverages that aligned with their visions for their big days.

How many bottles of wine does a guest need?

A good rule of thumb is to have one bottle of wine per two people for every two hours. This means if you host a four-hour party for ten people, you will need two bottles of wine for every two guests, or 10 bottles of wine, regardless of what you’re serving.

Is it OK to just serve beer and wine at a wedding?

Beer and wine only is fine. It would also work fine to add in one or two signature drinks. But, the formality of the wedding is not just about what guests wear. A “very formal” wedding should really include a full bar.

Is it cheaper to buy your own alcohol for a wedding?

1. Buy Your Own Booze. Buying booze at your go-to spot is a lot cheaper than purchasing drinks directly through a caterer. If your venue and caterer let you supply your own liquor, wine, and beer, you can hand-select your favorite brands without breaking the bank.

Who gets a tip at a wedding?

You can also opt for cash tips as follows: Catering/Banquet Manager and Head Waiter: $100–$300 each. Head Chef: $50–$100. Wait Staff and Kitchen Staff: $20 each.

How many drinks are in a 750ml bottle?

A 12-ounce can or bottle of malt liquor contains one and a half standard drinks and a 40-ounce container of malt liquor contains four and a half standard drinks. Wine: A 750 ml wine bottle contains at least five standard drinks. A bottle of fortified wine, such as sherry or port, contains almost eight standard drinks.

How many drinks are in a 750ml bottle of wine?

A “standard pour” of wine is 5 fluid ounces per glass. So, a standard 750 ml bottle of wine would contain approximately 5 servings.

How many drinks a week is alcoholic?

According to the National Institute on Alcohol Abuse and Alcoholism, drinking is considered to be in the moderate or low-risk range for women at no more than three drinks in any one day and no more than seven drinks per week. For men, it is no more than four drinks a day and no more than 14 drinks per week.

2021 Party Drink Calculator: How Much Alcohol Do I Need?

If you are planning a large event such as a wedding, housewarming party, 40th birthday party, or any other large gathering, you may be thinking how much alcohol you would need. Fortunately, we’ve created an useful party drink calculator to ensure that you don’t spend too much money on booze while still having plenty to drink. After reading our blog post How Many Glasses Do You Need?, you may be looking for further information on how much alcohol to purchase in order to fill those glasses. Plan on serving one drink each visitor for each hour of your event’s length.

The following is the formula that was used to create the party drink calculator: number of visitors x number of hours of party time Consider the following scenario: you are hosting a four-hour party for 250 people.

Let’s pretend you’ll be serving beer, wine, and mixed beverages during your event.

Beer accounts for 40 percent of all party beverages.

  • (Please keep in mind that most kegs hold 15.5 gallons of beer, or 165 12-ounce servings.) WHAT AMOUNT OF WINE DO YOU REQUIRE?
  • As a result, you may apply the following formula: (Total of Drinks – Beers) times 60% or (1000 – 400) x 60% = 360 glasses of wine.
  • For my calculations, I like to use 5 glasses per bottle because this ensures that you will have plenty.
  • 360 glasses of wine divided by 5 glasses per bottle is 72 bottles of wine required in this situation.
  • In order to do so, you need evaluate if the event will be held indoors/fall, winter, or spring, or whether it will be held outdoors/summer.
  • According to our example, you would require 36 bottles of red wine, 18 bottles of white wine, and 18 bottles of sparkling wine.
  • We calculated that you would require 24 bottles of each red, white, and sparkling wine to complete the task.
  • I always finish with the previous case before moving on to the next.
  • HOW MUCH SPIRITS DO YOU NEED FOR MIXED DRINK FORMULATIONS?
  • This may be calculated as follows: The sum of all drinks – beer – wine equals the sum of all mixed drinks.

Limiting your options to one or two “signature cocktails” might assist you in determining how much alcohol and mixers you will need to buy. The following ingredients are found in the average cocktail:

  • 1.5 ounces of a base liquor (such as vodka, gin, or rum), plus an additional half-ounce (the usual shot). Accent juices (such as lemon and lime) are often used in the range of 1/4 to 1/2 ounce. In order to fill a highball or tall cocktail with juice or soda, 4-6 ounces of the mixer are often required.

For example, if you are creating a mojito using rum, lime juice, and club soda, you may figure you will need 1.5 ounces of rum, 1/4 ounce lime juice, and 4-6 ounces of club soda to complete the recipe. You only need to calculate how many ounces your bottle of rum contains and divide that amount by 1.5 to determine how many cocktails you can prepare with that bottle. You can then repeat the process with your accent juices and mixers. CHAMPAGNE? It is recommended that one bottle of champagne be served for every eight attendees if champagne is being served during a champagne toast.

  • 250 visitors x 8 = 31.25 bottles of champagne would be the case in our hypothetical scenario (rounding up, you need 32 bottles).
  • Make sure you have a sufficient supply!
  • Drinking tap water is recommended whenever feasible to help protect the environment.
  • This results in a significant number of water bottles entering our landfills!

Frequently Asked Questions

How much booze do you need for a party of 50 people? In order to have a four-hour party with 50 people, you will need around 200 drinks: 80 beers, 72 glasses of wine (15 bottles), and enough ingredients to make 48 individual cocktails (amounts will depend upon what type of cocktail you serve). You should plan on 120 drinks if you aren’t providing wine. How much booze do you need for a party of 100 people? It is estimated that roughly 400 beverages will be required for a 4-hour party with 100 guests: 160 kegs of beer, 144 glasses of wine (29 bottles), and enough ingredients for 96 unique cocktail recipes (amounts will depend upon what type of cocktail you serve).

  1. Can you tell me how much booze you’ll need for 150 people?
  2. If you aren’t providing wine, make 360 drinks as a backup option.
  3. The following beverages are required for a 4 hour event with 250 guests: 400 beers, 360 glasses of wine (72 bottles), and enough ingredients for 240 individual cocktails (amounts will depend upon what type of cocktail you serve).
  4. Maintaining these guidelines, as well as utilizing our party drink calculator, you can be confident that you will have all you require (in terms of beverages) for your big event.
  5. Other blogs that might assist you in your planning include: How Many Pairs of Glasses Do I Require?
  6. What Size of Event Space Do You Require?
  7. Summary Title of the Article Calculator for 2019 Party Drinks: So, how much booze do I require?

Description If you are planning a large event such as a wedding, housewarming party, 40th birthday party, or any other large gathering, you may be thinking how much alcohol you would need. Use this calculator to get started on your planning. Author Candace LeakPublisher NameReventalsPublisher Logo

How Many Bottles Of Wine To Buy For Party Calculator

Is your event a party, wedding reception, fundraising event, or other gathering, and you’re wondering how much wine to purchase? Using this calculator, you may receive an estimate of how many bottles of wine you should purchase.

What Portion Of Your Guests Will Be Drinking Wine?

According to a Gallup study conducted in 2019, over 65 percent of those polled drink alcohol on a regular basis, with only 34 percent stating that they never consume alcoholic beverages. According to the results of the poll, beer is the preferred alcoholic beverage by 48 percent of those who drank it, followed by wine at 30 percent and liquor at 29 percent of those who drank it.

65% Of Guests Will Consume Alcohol

If you are unsure of the amount of wine drinkers who will be attending your event, multiply the total number of visitors by 65 percent to get an estimate of how many will consume any form of alcoholic beverage. If you have 100 guests, 65 of them are likely to consume alcoholic beverages. 100 multiplied by.65 equals 65

30% Of Guests That Consume Alcohol Will Prefer Wine

Thirty percent of the visitors who will consume alcoholic beverages will select wine over other options. For an estimated estimate of the number of visitors who will drink wine, we would multiply the number of guests who consume alcohol by.30. The prior example of our 65 visitors showed that 20% preferred wine over the other 60%. 65 multiplied by 30 is 19.5 After learning how many of our guests enjoy wine, we can determine how much wine we will need to have on hand for the event.

What type of wine should you serve?

White wine used to be the favoured option, but according to Nielsen scan data from 2019, red and white wines are now practically equally popular choices (46 percent red and 45 percent white).

The Most Popular Wine Varietals

Cabernet Sauvignon, Chardonnay, Pinot Grigio, Pinot Noir, Sauvignon Blanc, Merlot, White Zinfandel, Malbec, Riesling, and Shiraz were the most popular wine varietals in 2019. Cabernet Sauvignon, Chardonnay, Pinot Grigio, Pinot Noir, Sauvignon Blanc, Merlot, White Zinfandel, Malbec, Riesling, and Shiraz were the most popular wine varietals in 2019.

How Many Glasses Are In A Bottle Of Wine?

Wine is measured in 750ml bottles, which contain 25.36 ounces of liquid, and a common pour of wine is 5 ounces. Taking this into consideration, there are 5 glassservings in a single bottle of wine. For this calculator to work, the following information is entered to compute the amount of wine required:

  • In the case of wine, a 750ml bottle is equal to 25 ounces. Wine is typically served in 5 ounce portions
  • However, certain restaurants may provide larger portions. In the case of wine, one bottle is equal to five glasses of wine. Guests will typically have two glasses during the first hour and one glass during each subsequent hour. The tastes for white and red wines are about equal
You might be interested:  How To Make Wine Bottle Labels? (Perfect answer)

Additionally, you might be interested in The Ultimate Party Drink Planner Calculator.

How Much Wine Do I Need for a Wedding?

Do you want to include wine in your wedding reception? When it comes to money, the most crucial thing to know is how much you’ll require. There are a variety of elements to consider when determining the appropriate amount of wine, beer, and liquor for you and your guests, including the kind of venue, food, number of guests attending, budget, and other considerations. the image’s source One of the first items on your checklist should be determining whether or not the venue will allow you to bring in your own alcoholic beverages to consume.

  • It is important to remember that these fees may be pricey, with some towns charging up to $20 per bottle in some cases.
  • If the venue allows you to bring alcohol (and you have the means to pay the corkage fee), you’ll want to start by deciding what kind of bar you’ll be setting up.
  • Is it just possible to drink beer and wine?
  • Alternatively, how about a restricted open bar?

Let’s start with the assumption that you’re solely serving wine. As a result, be sure to provide sparkling, white, and red wines to your guests in such instance. (If you are interested in having ONEHOPE serve at your wedding, please see ourWeddings page for additional information.)

  • Sparkling: This wine is often served as a toasting wine. In a conventional 750ml bottle of sparkling wine, there are six full glasses of sparkling wine, and experts often recommend two glasses of sparkling wine each person. As a result, for 100 people, you would require 200 glasses (at two glasses per person), which equates to 34 bottles of wine. Since each case contains 12 bottles, you’ll need three cases (for a total of 36 bottles). Wines, both white and red: In the summer, while attending an outdoor wedding during the day, people tend to drink more white wine, whereas at night, when steak is given, they tend to drink more red wine. It is reasonable to assume that each of your visitors will have one glass of wine every hour and that the majority of white and red wines are consumed in the same quantity by most individuals. With five glasses per 750ml bottle of wine, you’d need 400 glasses for a wedding reception with 100 attendees and a four-hour time span. That’s 80 bottles of wine (40 white and 40 red), or slightly more than 6 cases of wine. If you plan on bringing your own wine, try shopping at warehouse clubs such as Costco and Sam’s Club to get the greatest prices possible on your purchase. Also, keep an eye out for deals in the marketing of local wine shops and supermarkets. Do you want to get your wine from ONEHOPE Wine instead of a chain store? Not an issue at all! You may serve our wine at your wedding and also give it away as wedding favors to your guests, all while donating a portion of the proceeds to one of our charitable partners through our foundation. It is also possible to donate an additional percentage to a charitable organization of your choosing. Put us in touch with the venue and we’ll handle the rest. More information may be found on this page. As a last option, you might want to consider utilizing The Alcohol Calculator, a helpful online tool that will assist you in determining how much wine you’ll need for your wedding reception depending on the size of your gathering as well as the cost of the wine itself Furthermore, always remember that it is preferable to drink too much wine than not enough. A easy formula to use to manually determine the amount of wine you will need for your wedding includes the following information: the number of people who will be attending your wedding and the period of time they will be drinking. Suppose you have 100 visitors and they would be drinking for around 3 hours. The calculation would be as follows: A hundred visitors multiplied by three glasses each hour (we’ll presume this is the meter) equals 300 glasses of wine. One bottle of wine equals six glasses, thus 300/6 equals fifty bottles of wine. 12 bottles equals 1 case of wine, therefore you’ll need a bit more than 4 cases of wine for this project. Ideally, a case each of red, white, and sparkling would be best, with 3 cases of sparkling being the most expensive. Remember that this is based on the assumption that your visitors would only be drinking wine and for a short period of time, so it’s always a good idea to round up and add a couple additional cases. If you’re drinking beer or another beverage, keep this in mind while making decisions.

Let’s make things a little more interesting now. Take, for example, the scenario in which you wish to provide more than simply wine to your visitors. If you intend to serve solely beer and wine, a decision that is often more popular on the west coast than the east, simply lower your wine order by 25% from the amount specified above. When offered the option between wine and beer, around 75% of visitors will choose wine, so you should organize your event appropriately. Make up for the expected 25 percent of attendees who consume alcoholic beverages by using the same calculations as described above.

  1. If you serve two drinks every hour (a total of 50 drinks) during the course of a four-hour event, you will need to account for 200 servings.
  2. Finally, if you intend to have a full bar, you will need to budget for hard liquor, mixers, and garnishes, among other things.
  3. Additionally, offering a restricted, or reduced, open bar is both more cost-effective and more appropriate, as providing a fully stocked bar for a four-hour event is unaffordable and unnecessary.
  4. The following are the most often encountered: Consider using basic mixers such as cranberry and orange juice, cola or club soda as a base for your cocktail.
  5. Regarding volume, anticipate that 50 percent of your visitors will consume only wine, with the remaining 50 percent ingesting a mixture of beer and spirits.
  6. Last but not least, a word of warning.
  7. For a function of your size, you’ll want to make sure that self-serve alcohol is permitted, and you’ll want to find out whether you’re legally permitted to return unopened alcohol once the event is over.
  8. If something goes wrong as a consequence of the alcohol you gave, you might be held accountable for any damages or injury expenses that occur as a result of your actions.
  9. ONEHOPE Wine at your wedding may be found on ourweddings website if you would like further information.

How Much Wine Do You Need Per Person? Planning Chart

Kate Miller-Wilson contributed to this article. For several years, Kate spent her time working at an elite fine dining establishment where she studied everything she could about excellent wines, food and wine pairings, and wine etiquette. More information can be found at Waitress in a Fine Dining Establishment California Wine Appellation Specialist has reviewed this document (CWAS) Karen Frazier is a woman who works in the fashion industry.

Karen Frazier is a woman who works in the fashion industry.

She has a California Wine Appellation Specialist credential from the San Francisco wine school, as well as a Bar Smarts mixology certificate, and she works as a bartender for charity events.

You may use these rules to calculate how much wine to purchase whether you’re hosting a small dinner with one other person or a large party with all of your friends.

Planning for a Get-Together

Kate Miller-Wilson contributed to this report. Kate learnt everything she could about great wines, food-and-wine pairings, and wine etiquette while working in an upscale fine dining establishment for several years. More information can be found at Server in a posh restaurant Certified Appellation Specialist for California Wine (CWAS) Karen Frazier is a woman who works in the field of social services.

Karen Frazier is a woman who works in the field of social services.

She has a California Wine Appellation Specialist credential from the San Francisco wine school, as well as a Bar Smarts mixology certificate, and she volunteers as a bartender for philanthropic events.

You may use these rules to calculate how much wine to buy whether you’re hosting a small dinner with one other person or a large party with all of your friends.

Type of Party Bottles of White Wine Bottles of Red Wine
Dinner party Four Four
Wine and cheese party Four, two each of two varieties Four, two each of two varieties
Wine tasting party Five to seven, one bottle of each variety Five to seven, one bottle of each variety
Cocktail party Three Four

Dinner Party

Written by Kate Miller-Wilson Kate learnt everything she could about great wines, food-and-wine pairings, and wine etiquette while working for several years in an upscale fine dining establishment. More information can be found at Waitress in a Fine Dining Restaurant Appellation Specialist for California Wine reviewed the work (CWAS) Karen Frazier is a woman who works in the field of social work.

Karen Frazier is a woman who works in the field of social work.

She has a California Wine Appellation Specialist credential from the San Francisco wine school, as well as a Bar Smarts mixology certificate, and she works as a bartender for philanthropic events.

You may use these rules to calculate how much wine to purchase whether you’re hosting a little dinner with one other person or a large gathering with all of your friends.

  • A one- to two-glass portion of pre-dinner wine
  • With dinner, serve two serves of white wine and two servings of red wine. With dessert, serve one glass of dessert wine.

You’ll need extra red and white wine on hand in case everyone gravitates toward one or the other, despite the fact that certain folks may like only one or the other.

Wine and Cheese Party

You’ll need extra red and white wine on hand in case everyone gravitates toward one or the other, despite the fact that certain folks may like just red or only white.

Wine Tasting Party

You’ll need extra red and white wine on hand in case everyone gravitates toward one or the other, even if some guests prefer only one or the other.

Cocktail Party

If you’re hosting a cocktail party and will be offering wine in addition to other beverages and canapés, planning can be a bit more difficult than you might expect. Knowing how many individuals will pick wine as opposed to mixed drinks or beer might be difficult to predict beforehand. According to Food and Wine Magazine, a fair rule of thumb is to plan on three glasses of wine for each guest attending a three-hour cocktail party as a starting point. In order to serve both red and white wine, you will need to divide the cost of your wine purchases in half.

Never Worry About Running Out

When planning a party, it is usually a good idea to get an additional bottle of wine. As a result, even if your visitors consume a little more alcohol than you anticipated, you will never have to worry about running out of supplies. LoveToKnow Media was founded in the year 2022. All intellectual property rights are retained.

How Much Wine Do you Need for your Wedding? We’ve Made a Handy Calculator to Help You Work it Out!

When it comes to weddings, one of the most often asked questions is “How much wine do I need for my wedding?” and we’re thrilled to be able to share the solution with you now. Because we can’t tell you precisely how many bottles of wine you’ll need for your seated lunch (it depends on a variety of factors, including the number of people you’re expecting and your desire to be generous! ), we’ve devised a simple formula to assist you in figuring it out for yourself. Photograph courtesy of Paula O’Haravia One Exceptional Day

How Much Wine Do I Need for my Wedding? A Simple Formula

We want to make things simple here at One Fab Day, which is why we’ve developed a formula that is straightforward to apply, regardless of how confident you are in your mathematical abilities! For the formula to work, you’ll need two pieces of information:

  • In this case, the total number of persons who will be dining at the dinner, including you and your spouse, is indicated by the number of guests. There is no need to make adjustments for youngsters, non-consumers, alcoholic beverage drinkers, beer drinkers, heavy drinkers, or any other group. Wine Allocation Per Guest: This number shows the amount of bottles of wine you would like to be served to each of your guests. This question is frequently answered with a half (or half and half, depending on your calculator) bottle per person, but the actual answer is highly dependent on how generous you want to be and the drinking culture in your social group. It is recommended that you serve two-thirds (or.66) bottle of wine per person if your guests are really ardent wine drinkers and you want to ensure that everyone receives enough wine, with a little bit extra to go around. It may be more appropriate to use 1/3 (.33) if your group isn’t very alcoholic and you anticipate a large number of non-drinkers in attendance
  • Nevertheless, 1/3 (.33) may not be as effective in this situation.

The Formula:

The total number of persons who will be dining at the dinner, including you and your spouse, is indicated by the number of guests. There is no need to make adjustments for youngsters, non-consumers, alcoholic beverage drinkers, beer drinkers, heavy drinkers, or any other group of individuals. Guests’ Wine Allocation: This number shows the amount of bottles of wine you would like to be provided for each of your guests. In this case, the most typical response is 1/2 (or.5, depending on your calculator) bottle per person, although the exact amount truly relies on how generous you want to be, as well as the drinking habits of your social group.

It may be more appropriate to use 1/3 (.33) if you’re not planning on serving alcohol and you know that there will be a large number of non-drinkers in attendance.

How Much Wine Do I Need for my Wedding? Red Wine Vs White Wine

Once you’ve determined the number of bottles of wine you’ll need for your wedding reception, you’ll need to determine how many of those bottles should be white wine and how many should be red wine, among other things. You may even include rosé in the mix if the wedding is taking place during the warmer months. A 50/50 split is recommended as a very broad, general guideline, however keep in mind that the following elements must also be considered:

  • As soon as you’ve determined how many bottles of wine you’ll need for your wedding reception, you’ll need to decide how many of those bottles will be white wine and how many will be red wine. You may even include rosé in the mix if your wedding is taking place during the warmer months. A 50/50 split is recommended as a very broad, general guideline, however keep in mind that the following elements must also be taken into consideration

Once you’ve determined how many bottles of wine you’ll need for your wedding reception, you’ll need to determine how many of those bottles should be white wine and how many should be red wine. You might even include rosé in the mix if it’s a summer wedding. A 50/50 split is recommended as a very broad, general rule, but be careful to take the following things into account as well:

How Many Bottles Of Wine For 50 People? – Productos Furia

So, assuming a gathering of 50 individuals, you will serve around 250 beverages during the event. A 1.75L bottle of alcoholic beverage will make around 32 drinks. In order to save money on wine, getting a case rather than a bottle is the most cost effective option. You may expect to need around four cocktail napkins per guest.

You might be interested:  What Does It Mean When A Wine Is Corked? (TOP 5 Tips)

How many bottles of wine do you need for 60 guests?

The bar is fully stocked.

Guests 10-25 35- 60
The Spirits (bottles)
Whitewine 7 8
Redwine 2 5
Champagne 4 6

How many bottles of wine do you need for a wedding?

What much of wine to purchase for a wedding. Calculate the number of visitors by dividing it by 2.15 to determine how many bottles to purchase. So, let’s suppose there will be 100 people attending the wedding. You could expect to receive around 46 bottles of wine for the event if you divide the total number of guests by 2.15.

How do you calculate drinks for a party?

It’s a lot less complicated than figuring out how much wine to buy for a party. Every attendee should get a drink for every hour of the party, plus one extra in case they desire more, according to the formula, which is brief and straightforward. As a result, the formula is as follows: number of soft drinks=number of attendees * (party duration in hours + 1).

How much does an open bar cost for 50 guests?

Beer and house wine (plus soda and juice) are available for $15-$20 per person, depending on the selection. Full bar with a limited selection of beers and house wine (including soda and juice): $20-$35 per person (plus tax and tip). Full bar with premium brand liquor, domestic and international beer selections, and house wine: $35-$40 per person (including tax and gratuity).

How much alcohol do you need for a wedding of 50?

You’ll need 34 bottles of beer, 7 bottles of wine, and 2 bottles of liquor for every 50 visitors you’ll have (per hour). In order to serve 100 visitors, 67 bottles of beer, 14 bottles of wine, and four bottles of liquor will be required (per hour).

How many bottles of wine do I need for 7 guests?

You’ll need 34 bottles of beer, 7 bottles of wine, and 2 bottles of liquor for every 50 attendees at your party (per hour). You will require 67 bottles of beer, 14 bottles of wine, and 4 bottles of liquor for every 100 people (per hour).

How do you figure out how much wine to buy for a party?

Alternatively, to keep things simple, divide the total quantity of beverages into thirds and assign a third to each category.

750-ml bottles of wine hold around 5 servings; thus, divide the number of wine drinks by 5 to get the number of bottles you’ll need for the meal.

How many glasses of wine do you get from a bottle?

Simpler still, divide the total number of drinks into three categories and assign one-third of them to each. 750-ml bottles of wine hold around 5 servings; thus, divide the number of wine drinks by 5 to get the number of bottles you’ll need for your party.

How much should you spend on alcohol for a wedding?

The average amount of money spent on a reception bar/liquor, according to an internal research, was $2,300. Although it appears to be a significant sum of money, most couples consider it to be a worthwhile investment, especially after witnessing their guests enjoying unique drinks and having a good time on the dance floor.

What type of wine should I serve at my wedding?

When it comes to weddings, lighter wines such as Sauvignon Blanc and Pinot Noir are preferable for warm, outside daytime events; on the other hand, heavier wines such as Chardonnay and Cabernet Sauvignon are better suited for indoor, fall and winter events.

How much is an open bar for 200 guests?

For a wedding with 200 guests, the following is what you will need to supply a complete open bar and an estimate of how much it will cost: $1,400 in wine is equal to 140 bottles of wine. $1,750 in beer is equal to 350 bottles of beer. 30 bottles of booze (750 mL each) equals $900 in total.

What kind of alcohol should I buy for a party?

Except if you’re P. Diddy, the only alcoholic beverages you’ll need for a wild party are vodka, rum, whiskey, wine, and beer. Make sure you have plenty of cranberry juice, club soda, Coke, tonic water, and lemons on hand for the mixers. Fill two pitchers with two readymade concoctions, such as a rum punch or a specialty cocktail, and serve immediately.

How much liquor is needed for a party of 100?

So, to summarize, you would require the following for 100 guests: 70 bottles of wine were consumed. 175 bottles of beer were consumed. 15 bottles of alcoholic beverages (750 ml)

Wedding Alcohol Calculator

To summarize, you would require the following for 100 guests: The wine was 70 bottles. One hundred and seventy-five cases of beer 175 liters of alcoholic beverages (750 ml)

How to calculate alcohol for a wedding

You must take into account four factors:

  1. Who’s drinking: How many drinkers are there compared to how many non-drinkers are there
  2. Beer, wine, liquor, and/or champagne are the most common alcoholic beverages. Approximately how long the party will last: Most weddings last 4-5 hours, and guests generally consume 1-2 alcoholic beverages every hour of the event. Prices for alcoholic beverages are as follows: A beautiful bottle of Dom Perignon will cost you more money than a bottle of Kirkland Signature Prosecco
  3. Nonetheless, both are excellent choices.

Attendees who drink: how many drinkers are there compared to how many non-drinkers are there; Beer, wine, liquor, and/or champagne are the most often consumed alcoholic beverages in the United Kingdom. Approximately how long the party lasts: The average wedding lasts 4-5 hours, with guests consuming 1-2 drinks every hour on average. Following are the current pricing structures for alcoholic beverages You’ll spend more money on a fine bottle of Dom Pérignon than on a bottle of Kirkland Signature Prosecco.

  • A bottle of champagne will fill six to eight champagne glasses. Five glasses of wine may be made from a single bottle of wine. One liter bottle of liquor yields around 18 drinks.

What is the number of bottles in a case?

  • Can you tell me the number of bottles in a case?

There’s a lot that goes into making wedding guests feel welcome and entertained. You may engage a professional beverage service (hello, open bar!) to save time on the big day. DIY is a great way to save money. Before making a decision, find out if equipping your own wedding bar is a good investment in the section below.

Is it cheaper to buy your own alcohol for a wedding?

Although purchasing your own alcohol requires more effort, you will often save money in the long run. There are four types of wedding bars to choose from:

  1. Open: The hosts pay for the full cost, therefore visitors are not required to pay
  2. Limited: Hosts cover the costs but only provide a limited number of possibilities
  3. Drinks are paid for with cash by the guests. Non-alcoholic: Also known as a “dry bar,” this establishment serves solely non-alcoholic beverages.

You will be charged in one of three ways if you elect to pay the price of alcohol for your guests.

Most venues and caterers will charge you in one of three ways:

  1. Per person – A flat charge per person for unlimited alcoholic beverages
  2. Charges are assessed based on the number of drinks ordered. DIY Bar – You provide the booze, and you may employ bartenders to serve it to customers.

The sort of bar you choose will be determined by your own tastes as well as those of your visitors. Open bars are ideal for sipping on drinks, whilst restricted bars are ideal for drinking beer or wine on the go. Cocktail hours and toasts are established in limited establishments, and they are strictly enforced. Although open bars are popular, they are often the most costly. Due to the fact that they will be receiving free beverages for the duration of the celebration, expect people to go all out.

Wedding Alcohol for 50+ Guests

If you’ve decided on an open bar, bear in mind how much alcohol you’ll need to serve your guests. Here’s a basic rule of thumb for a reception lasting more than four hours with moderate drinkers: There are 50 people in total.

  • There will be 30 bottles of wine, 90 bottles of beer, and four bottles of liquor or spirits.

There will be 100 people in attendance.

  • 60 bottles of wine, 180 bottles of beer, and 8 bottles of liquor/spirits were consumed.

150 people are expected to attend.

  • 90 bottles of wine, 270 bottles of beer, and ten bottles of liquor/spirits were consumed.

You could be tempted to go with a cash bar, which would force visitors to pay for their own drinks, when you’re putting together your budget for alcoholic beverages. Undoubtedly the most affordable alternative, but is also the most contentious. Don’t bother with it! However, if you, your family, or your visitors do not consume alcoholic beverages, you may not even be required to provide alcoholic beverages at all. If this is the case, you might want to consider having a dry wedding. Calculator for non-alcoholic beverages If you’re having a four-hour wedding, you’ll need at least 1-2 glasses of water and 3-4 non-water drinks (such as juice, ice tea, soda, and so on) per guest.

However, if you decide to bring your own booze, be careful to inquire about potential corkage fees with the venue.

Wedding bar shopping list

Do you need to pick up any booze for the party? A basic list of everything you’ll need for a party of around 50 guests is provided below. (Adjust the calculation to account for the size of your guest list.) alcoholic beverages, such as beer and wine

  • 1 case Champagne
  • 1 case red wine
  • 1 case white wine. Whiskey, Bourbon, and Gin are all half-liter bottles. Scotch is one-liter bottle. Vodka is three-liter bottle. Tequila is half-liter bottle. Beer is two to three cases.
  • 1/2 case of tonic water, 1/2 case of club soda, 1 gallon each of cranberry juice, 1/2 gallon each of orange juice and grapefruit juice, 1 case each of ginger ale, 1 liter each of triple sec, 1/2 gallon each of lime juice, 1 case each of sparkling water and 2 cases each of bottled water, Diet Coke, 1 case each of Coke, Diet Coke, 1 case each of Diet Coke, 1 case each of Coke, Diet Coke, Die

Costco is a great place to find inexpensive alcohol. They have a large assortment of wines and beers to choose from. Kirkland Signature alcohol items are backed by a slew of well-known names (like Alexander Murray scotch and Gordon Biersch restaurant).

10 ways to save on your wedding reception

Please consider the following money-saving suggestions before you begin your party planning:

  1. Investigate alternatives to the standard banquet hall- Instead of a traditional banquet hall, consider museums, municipal parks, libraries, gardens, and even boats for your special day. It is not necessary to purchase your wedding dress
  2. Instead, consider renting it. Platforms like asRent the Runway can help you find a stunning wedding dress at a reasonable price. Remember to include your bridesmaids! Our guide covers the finest sites to shop for bridesmaid gowns
  3. It also includes a section on accessories. Choose a wedding date during the “off-season”- Most venues will provide significant discounts on their standard rental fees for weddings held between November and March. Saturday, you’re out of here- Saturday is the most costly day of the week to have a wedding reception, by far. Consider throwing a Sunday brunch party to save a lot of money. Also, inquire as to if any dates are available at your preferred venue. Embrace nature’s splendor – Beach or outdoor gatherings typically require less décor, but the sights are no less impressive. Maintain a single location so that you do not have to deal with the additional price of transferring individuals from point A to point B. Look for “all-inclusive” packages—some venues provide on-site coordination, food, drinks, staff, cake, and other services, as well as on-site coordination. You have the event space as well as everything else in one convenient location. Choose flowers and food that are in season- Select locally grown flowers and food products when they are at their peak availability. During the spring and summer months, lilacs, for example, are more likely to flower. Reduce the number of guests you’ll be inviting—don’t feel pressured to include Uncle Joel (who you’ve only met twice in person). Concentrate on the people who are familiar with you and your fiance. It’ll be a lot more intimate and enjoyable gathering. Limit the number of plus-ones- While we’re on the subject of visitors, you have the option of being choosy about the number of plus-ones for your guests. This implies that only married couples, engaged couples, and couples in a committed relationship will be offered plus-ones.

Cheers!

It is easy to become overwhelmed by the process of planning a wedding, but have no fear. You don’t have to accomplish everything on your own if you want to stay within your budget limits. Enlist the assistance of retired aunts, skilled younger cousins, and ride-or-die BFFs to complete the task. Chances are they’ll be interested in contributing to your big occasion. It is possible that their comments and creative abilities can relieve some of the tension you are feeling. Keep in mind that the most essential thing is that you and your special someone spend the rest of your lives with one other.

Amber Kong works as a content and creative specialist at CreditDonkey, a website that compares and assesses diamond jewelers.

Follow us on Twitter and Facebook for the most up-to-date information.

If you make a purchase after clicking on a link in our content, we may get a commission. You are under no obligation to utilize our links, but doing so will help to support CreditDonkey.

This is the Best Wedding Alcohol Calculator

Trying to figure out how much alcohol you’ll need for an open bar wedding is so difficult that there are wedding alcohol calculator applications, graphs, and spreadsheets that have been developed to try to assist you. Because we find most of them to be a little more complex than they need to be, we’re going to attempt to break it down for you in the most straightforward way we can without creating a powerpoint presentation for you. LOL. Apaige Photography captured this image. OK. So, depending on the quantity of guests you’re expecting, here’s the most fundamental wedding alcohol calculator facts you’ll need to know.

LOL.

  • The following items will be provided: 70 bottles of wine, 175 bottles of beer, 15 bottles of liquor (750 mL), 20 bottles of champagne for toast (optional), and

150 GUESTS ARE INVITED:

  • 105 bottles of wine were consumed. 266 bottles of beer were consumed. 22 bottles of distilled spirits (750 mL each)
  • 30 bottles of champagne (optional) for the toast

OVER 200 GUESTS:

  • Thirty-five bottles of liquor (750 mL)
  • Forty bottles of champagne for toasting (optional)
  • 140 bottles of wine
  • 350 bottles of beer
  • 140 bottles of champagne for toasting (optional)

What was our thought process behind that? As a reminder, the math is as follows:

1. Figure Out How Long Your Wedding Reception/Cocktail Hour Will Be

It is reasonable to assume that guests will consume two drinks during the first hour of the open bar and one extra drink during each subsequent hour. The entire length of a wedding reception will vary (you can read more about how long a wedding reception should behere), but for the sake of this guideline, suppose it will be 5 hours (1 hour for your cocktail hour and 4 hours for dinner and dance) in duration. Consequently, for a 5-hour cocktail hour/reception, that’s a total of 6 drinks per person, which is what a lot of wedding websites will propose.

CHECK OUT THIS OTHER POST: How to Host the Best Backyard Wedding Ever No, it is not expected that individuals will consume seven drinks per person, and of course not everyone will drink two or even one, but you must account for the number of times servers may pick up a half-full drink or someone’s drink is misplaced while dancing.

Extra bottles of wine that remain unused after the wedding may be given as hostess or Christmas presents, and you won’t have to worry about running out of booze because you didn’t purchase enough to begin with.

2. Calculate How Many Drinks Come in a Bottle You’re Serving

  • 5 glasses of wine (including champagne) in a 750 ml wine bottle (including champagne). In a 750 mL spirit bottle, there are 12 drinks
  • And, of course, one serve is equal to one bottle of beer.
You might be interested:  How To Heat Mulled Wine? (Solution found)

This was one of the most informative and straightforward recommendations I could find online about how many servings a bottle of alcohol of various sizes may hold.

3: Decide What You Want Your Alcohol Mix to Be

To be clear, we’re going to presume you’re having a complete open bar for the sake of this post (if you’re not, don’t be concerned.) We’ve got you covered (see section below). Whereas websites like Total Wine encourage you to use a ratio of 50% wine drinkers, 30% beer drinkers, and 20% spirit drinkers, we believe it is safer to say 50% of guests want wine, 25% beer, and 25% want the hard stuff; however, keep in mind that you are the only one who knows your guests better than anyone else. Because there were a lot of wine and spirit drinkers at my wedding, I would have made the cocktail 60 percent wine, 30 percent alcohol, and 10 percent beer, to accommodate the majority of guests.

So, using ALL of those figures, here’s how you’d figure out how much money you’d need in total for a 100-person wedding, given the percentages and everything else listed above:

For 100 guests:

50% of attendees = 50x(Number of Drinks Required According to Total Hours) = 7=350/(Number of Glasses per Bottle of Wine) = 5 (50 percent of guests)

=70 bottles of wine needed

(25 percent of guests) = 25X(number of drinks required based on total number of hours spent) = 7

=175 bottles of beer needed

25% of visitors = 25X(Number of Drinks Required based on Total Hours) = 7=175/(Number of Servings per 750ml bottle of liquor) = 12

=14.5 (round up to 15) bottles of liquor needed

OPTIONAL….

Champagne Toast:

(5 glasses of champagne per bottle of champagne divided by 100 visitors) = 5 glasses of champagne per bottle of champagne

=20 bottles of champagne needed

So, to summarize, for 100 visitors, you would require:

  • The following items will be provided: 70 bottles of wine, 175 bottles of beer, 15 bottles of liquor (750 mL), 20 bottles of champagne for toast (optional), and

Only Having Beer and Wine?

It goes without saying that if you’re simply serving beer and wine, the percentages you’ll need for each will automatically increase up in proportion. In this case, you would most likely estimate a 60-40 wine and beer mix, which would result in the following values for your calculations: While the figures in the wedding alcohol calculator above are only estimations, I advise you to consider the size of your guest list when making your calculations. Is it true that they are heavy drinkers? Increase each of those figures by a couple of bottles.

Reduce the intensity by one or two notches.

This wedding alcohol calculator is not intended to be a definitive reference; rather, it is intended to serve as a starting point for you to determine how much alcohol to serve your guests.

In the event that you plan on employing the wedding alcohol calculation formula that we developed above, the shopping list for it is provided below.

4: Compile Your Shopping List

OK. So here’s where I believe the most difficult component of all wedding alcohol calculators lies: calculating the amount of alcohol consumed. How much of each spirit should be obtained? A basic complete bar should have vodka, gin, rum, tequila, and whiskey, as well as other spirits. Then consider adding a bottle or two of your favorite bourbon, scotch, brandy, or any other specialty spirits that you enjoy sipping. For reference, here’s a well-rounded list you can use to figure out how much vodka to whisky you’ll need for a party of 100 people, assuming you purchase 15 bottles of booze.

Wine

If you’re having an evening wedding, you’ll want to provide a variety of wines, with a preference for reds if you’re giving a reception. Wine A simple to comprehend ratio of what sorts of wine to order for a wedding or other event is provided below by Folly:. Weddings in the fall, winter, and spring: During the fall, spring, and winter months, people prefer to consume more red wine during indoor weddings. For this style of wedding, it is customary to have a wine mix that contains around 50% red wine.

Consider a blend that has 30 percent of each of the three types of wine.

However, if you’re offering fish or shellfish, you might want to consider providing rosé as an alternative to the traditional white wine. Consequently, if you’re purchasing 70 bottles of wine, your shopping list for an evening wedding reception inside would look something like this:

  • 35 bottles of red wine
  • 23 bottles of white wine
  • 12 bottles of sparkling wine (not including additional bottles if you’re having a toast)

CHECK OUT THIS OTHER POST: Wedding Budget: Where to Save and Splurge

Beer

A combination of three different varieties of beer is ideal. If that’s the case, I’d go with one pilsner, one lager, and one India Pale Ale (and try to make at least one of those mainstream enough for your Uncle Joe to enjoy, like a Miller Lite).

Mixers

If you’re crafting specialty cocktails, you’ll want to be sure to stock up on all of the ingredients, including mixers (and, of course, any specialty cocktail-specific ingredients). Also, garnishes are a must-have for any cocktail bar. When employing a bartender service (which is required by most venues), it’s frequently easier to let them supply the basic mixers and garnishes, as well as other items such as glasses and napkins, rather than having to worry about them.

In terms of mixers, plan on having the following for 100 guests:

  • 12L of club soda or seltzer
  • 6L of ginger ale
  • 8L of Coca-Cola
  • 8L of Diet Coca-Cola
  • 12L of Lemon-Lime Soda
  • 12L of lemon-lime soda 6 liters of tonic water 3 quarts of whatever juice you desire (you should at the very least include orange, cranberry, and grapefruit)
  • 3 quarts of water
  • 2 bottles each of sour mix, grenadine, simple syrup, and bitters
  • 2 bottles each of grenadine, simple syrup, and bitters
  • 1 bottle of dry vermouth and 1 bottle of sweet vermouth

Garnishes

  • 1/2 lemon or lime per guest (pre-sliced)
  • 2 olives and cherries each guest
  • 1/2 lemon or lime juice per guest

Phew. Okay, this post has turned out to be far longer than we anticipated, and I’m confident that there is a great deal more information we can include in future pieces. In the meanwhile, are you planning an open-air DIY wedding bar for your guests? If so, please tell us how much you’re receiving for it in the comments section below, as well as which wedding alcohol calculator you used and enjoyed. While we only link to items and services that we believe you will enjoy, some of the links on our site are monetized to help us keep the lights on.

All of our opinions are entirely our own.

Listen to the Woman Getting Married Podcast

By selecting the number of hours and attendees for your party, as well as the sort of alcohol you wish to offer, you can use this helpful calculator to find out how much alcohol you’ll need for your gathering.

Start the Party

Sending an Evite invitation will get the party started, and then you’ll have to work hard to make your event memorable — while still remaining sane. There’s no need to spend a lot of money on a party when you have our helpful party planning advice and ideas. And we believe that is deserving of a drink. Cheers! The information obtained as a consequence of using this tool is just for informative purposes, and the calculations are based on estimations and other assumptions. The accuracy of the information cannot be guaranteed, and it is only intended to be used as a general guideline.

How Many Bottles of Wine Does Your Dinner Party Need?

Featuring a wine calculator, The Fresh Rules of Dinner Parties is a new collection of advice, recipes, and points of view on one of the things we’ve been missing the most: dinner parties. All of the tales may be found here. For your dinner party, how much wine is “enough” for the number of people attending? If you’re looking for a convenient drink calculator, go no further than this one, which is exclusively dedicated to wine. The majority of people would agree that the food is the most significant aspect of a dinner party, but I would argue that having enough wine is the most critical part.

It sparks conversations, enhances dishes (assuming you didn’t burn them), and helps to keep the party going. It’s okay to do a Tim Allen and convert a Thanksgiving turkey into a wildfire, and no one will notice provided there are enough of bottles available.

How many glasses are in a bottle of wine?

To begin, you must first determine how many glasses of wine are contained within a bottle of wine. Given that we’ve all experienced evenings where a whole bottle of red wine equals two very big mason jars of Cab Franc while despise-watchingLove, it’s worth mentioning. Actually, it’s vital to break things down into smaller pieces. An average bottle of wine contains 750 milliliters, which equates to around 25 ounces of liquid. The recommended serving size for wine is five ounces, which translates to five glasses for each bottle consumed.

  1. I believe it to be a joke.
  2. There is no one.
  3. 750 mL of wine, in my very professional opinion, equals around four glasses of wine and two chugs straight from the bottle, assuming you are the dinner party host, which is a lot of chugs.
  4. More information may be found here.

What is the alcohol content of a bottle of wine?

To begin, you must first determine how many glasses of wine are included within a bottle. Given that we’ve all experienced evenings where a full bottle of red wine equals two very big mason jars of Cab Franc while despise-watchingLove, it’s important to point out. Breaking the process down might be beneficial. An average bottle of wine contains 750 milliliters, which equates to around 25 ounces. Each glass of wine should contain five ounces, thus a bottle of wine should include five glasses in total.

I believe it to be a prank, however.

The answer is “nobody.” The reasoning of five glasses per bottle nearly invariably fails to deliver the desired results.

It seems like they’re sipping some sort of weird orange wine.

So how many bottles of wine do you need for your party?

Okay, let’s get back to the primary point. Based on the facts provided above, I believe you will require at least one bottle of wine per visitor. Consider this: you drink a glass of wine before dinner, a few during dinner, and another after supper. A bottle of wine is right there in front of you. And that’s just being conservative. However, it is just my opinion, and this is not my dinner party. A little arithmetic will be performed in order to determine exactly how many bottles you will require.

Help please, roughly how many bottles of wine would I need for 40-50 people?

Post1Member46 has made 46 posts Newbee Greetings to everyone. I’ll be serving a couple of cases of a range of beers as well as a selection of red and white wines for 40-50 people; does anybody have an estimate of how many bottles of wine I’ll need to serve that many people? (I’m a little afraid to find out the answer, hehe.) Thank you very much!

I’ve gotten some wonderful suggestions from other articles about what types of foods to buy that are on the cheaper side but still delicious; I simply don’t know how much to spend on them. Post3Member872 has made 3 posts. a bee in a hive

Drinks are limited to two per person for the first hour and one drink per person for each additional hour. The wine / beer split will be determined by the number of people in attendance and what they choose to drink. Note: Because I did not trust this method, I overpurchased and ended up with a lot of leftovers. I was handing out bottles of wine to guests to go home with them. Ridiculous. Post4Member6592 has made 6592 posts. Beekeeper is a job title that describes a person who keeps bees. Is wine consumed by all 40/50 of the population?

  • Due to the fact that we will be entertaining a comparable amount of people as well as offering beer and liquor alternatives, we will be serving 5 Litres of red and 5 Litres of white wine.
  • The Buzzing Beekeeper is a Post5Member9990 postBuzzing Beekeeper In order to accommodate a 4.5-hour reception with a full open bar and wine service at dinner, my caterer recommended 5 glasses per person.
  • But if there are any leftovers, I’ll drink it!
  • OP, I was wondering the same thing!
  • The honeybee Our wedding had a total of 70 guests.
  • a total of 24 bottles of wine (12 white, 12 red) 4 bottles of rum (1.5 liters each) (signature drink) Following the wedding, we had around 2.5 crates of beer left, 24 bottles of wine remaining, and no rum left.
  • The majority of individuals who used alcohol did so in excess, however I will add that those who did consume alcohol did so in large quantities.

Post8Member1015 times on this page Bumble bee is a kind of bee.

Some establishments may or may not permit the use of hard liquor.

We went through a lot of stuff tasting everything, and they returned the things we didn’t care for.

How much do you know about the preferences of your guests?

What is the duration of your reception?

In a case of 12, there are 60 servings.

It’s possible that others only have 2 or less (one with cocktail hour and one with dinner).

how are you approaching this?

If you want to be on the safe side, I’d suggest three cases of red and three cases of white would be plenty (with lots left over).

The likelihood is that more people will drink red than white, so if you want to do 3/2, that’s OK as well. To avoid overspending, get two red and two white cases of twelve each, and I’m confident that you’ll have more than enough for your needs. Post10Member46 has made 46 posts. Newbee

Thank you very much, ladies! Well… I would guess that half of the attendees would not consume excessive amounts of alcohol, but a good third of them are my buddies, and they will almost certainly have at least two or three beverages. Other types of mixed drinks would be fantastic, and we’ll see what we can accomplish with what we have available, but for now, beer and wine are my go-to beverages. Thank you so much to everyone; this has already been quite beneficial! And I’m relieved to know that I’m not the only one who has this question.:) Post11Member46 postsNew to the Forum @Anise: Wow, thank you very much.

That’s something I’ll certainly look into.:) Post12Member234 comments on this post Bee who lends a hand For four hours, we served beer, wine, and mixed beverages to a total of 100 guests.

There were quite a few non-drinkers in attendance, and it was fairly warm outside, so I believe a large number of drinkers opted for mixed drinks (with ice!).

It was a pleasure working with the manager at the wine store, who provided useful advice on how many bottles to purchase and offered to take any leftovers back.

According to my estimation, you could easily get away with only 12-15 bottles altogether, based on the assumption that at least 10 of the 40 visitors there would only be drinking beer, leaving only 30 people who would be drinking wine.

The heavy drinkers will consume more alcohol, while the light drinkers will consume less, resulting in a more or less equal distribution of alcohol.

It’s a good deal!

Newbee @LaughLines: Thank you for taking the time to share your story with me!

Post16Member15 has made 15 posts Newbee Was it always the case that two drinks were consumed during the first hour and one drink was consumed during each subsequent hour?

Other people will drink more than others, and I am aware that some members of our group do not drink at all or only a little amount of alcohol. What do you think? Should I increase my estimations by one drink?

Leave a Comment

Your email address will not be published. Required fields are marked *