A buttload of wine is 126 gallons of wine. For real. This isn’t an April Fool’s Day prank. A “butt” is an actual unit of measurement.
How many gallons in a buttload of wine?
- So, in terms that we all understand, a butt of wine is approximately 126 gallons. That’s compared to a standard wine barrel that contains about 60 gallons. So, technically, a buttload of wine is roughly two standard barrels. And, just so you know, a butt of wine is also called a pipe.
- 1 How much is an assload of wine?
- 2 What does the expression Buttload mean?
- 3 How much is a hogshead of wine?
- 4 How much is a Buttload of beer?
- 5 Is a Buttload an actual measurement?
- 6 Where does the term Buttload come from?
- 7 How much is a Crapton?
- 8 How big is a Puncheon barrel?
- 9 How big is a pipe of wine?
- 10 What is a hogshead of wine?
- 11 How many barrels are in a Buttload?
- 12 HOW MUCH IS A BUTTLOAD? AND WHAT’S IT GOT TO DO WITH WINE?)
- 13 How Much is a Buttload, Exactly? – Now I Know
- 14 buttload – Wiktionary
- 15 The difference between a buttload, boatload and shitload.
- 16 Did You Know That A ‘Butt’ Is An Actual Unit Of Measurement?
- 17 We Saved 44 Buttloads of Wine in 2019
- 18 A Short History of the Buttload Measurement
- 19 How much is a butt-load?
- 20 ‘Butt’ is an actual unit of measurement
- 21 Оставить комментарий
How much is an assload of wine?
A buttload = 491 liters beer, wine, or water) or a specific unit of liquid measurement equivalent to 108 imperial gallons, or 491 liters.
What does the expression Buttload mean?
Noun. buttload (plural buttloads) (obsolete, UK, West Country) A regional English measure of capacity of a heavy cart (a butt), containing 6 seams, or 48 bushels, equivalent to 384 gallons. quotations ▼ (dated, Britain, Southern US, New England) A large amount carried in a butt.
How much is a hogshead of wine?
A wine hogshead is about 79 gallons, but there tends to be some variation on the exact amount. During the colonial era, traders used a tobacco hogshead for both measuring and transporting, and in the 19th century, a sugar hogshead was a common measurement in the American South.
How much is a Buttload of beer?
But in general, a “tun” is about 250 to 300 gallons (or 950 to 1,100 liters). An empty butt, in turn, can hold about 125 to 150 gallons (475 to 550 liters) of wine, whiskey, ale, etc. A full cask of those? That’s a buttload.
Is a Buttload an actual measurement?
A buttload of wine is 126 gallons of wine. For real. This isn’t an April Fool’s Day prank. A “butt” is an actual unit of measurement.
Where does the term Buttload come from?
The Old French “bot” referred to a barrel or wineskin (same origin as bottle—a small bot), and was itself derived from the Latin “buttis” or cask. A standard butt held two hogsheads (108 to 140 gallons). Thus, a butt-load was the volume of material that could be reasonably contained in a gurry-butt.
How much is a Crapton?
(slang, mildly vulgar) A very large amount.
How big is a Puncheon barrel?
(A puncheon is generally defined as a barrel holding 500 liters.) Besides the growing interest in and use of puncheons, there is also a move toward fermenting in larger oak uprights, with perhaps the best known being the construction of a new winery facility around the large tanks at Robert Mondavi Winery.
How big is a pipe of wine?
It seems the average pipe of Port is 550 liters (about 145 gallons). If your friend has six cases, that’s 54 liters, or about a tenth of a pipe.
What is a hogshead of wine?
A hogshead is a large cask of wine. References to “hogsheads” were commonly found in colonial America as a standard measure of taxation for wine and other beverages. It now refers to a specified volume equaling 63 U.S. gallons.
How many barrels are in a Buttload?
So, in terms that we all understand, a butt of wine is approximately 126 gallons. That’s compared to a standard wine barrel that contains about 60 gallons. So, technically, a buttload of wine is roughly two standard barrels.
HOW MUCH IS A BUTTLOAD? AND WHAT’S IT GOT TO DO WITH WINE?)
In the imperial measuring system*, it is exactly 130 gallons, according to those who like to trust them. The termbutt is derived from the French wordbotte, which literally translates as boot. Buttload of wine is the second largest wine barrel available for purchase, and I’m not sure what the terms botte and boot have to do with wine, but I DO know that a buttload of wine is the second largest size available for purchase. Despite the fact that the Heidelberg Tun is reputed to be the world’s largest wine barrel, it is not for sale.
The Tun, which contains more than 58,000 gallons of wine, was built under his supervision, with the help of 130 oak trees that were harvested.
According to the Seguin Moreau cooperage in France, the hogshead barrel, which holds a meager 79 gallons, is one of the bigger standard-sized wine barrels, although it is less common than the 185 gallon barrel.
There is one on the market that has a capacity of 600,000 liters (158,503 gallons), but there is no information on the pricing.
* The Imperial Measurement System (also known as the Imperial System of Measurement) and the Metric System are the two most widely used measurement systems in the world today.
For your information, one liter is equivalent to.264172 gallons, and one meter is equal to 3.28084 feet.
How Much is a Buttload, Exactly? – Now I Know
If you were out drinking over the weekend, it’s possible that you consumed more alcohol than you should have. To put it another way, you could have consumed a “buttload.” The word “buttload” is a slang expression meaning “a lot” that is meant to be amusing. It does not necessarily imply (at least in theory) that you drank beer from someone else’s rear end. In fact, when it comes to discussing the size or quantity of something, butts should be avoided wherever possible. The question is, where did the term “buttload” originate?
Don’t be concerned – there are no body parts involved in the solution.
The portion you sit on (or with?) is most likely derived from the French term “butte,” which literally translates as “mound.” The phrase “butt of a joke” is thought to have originated in French, but it is derived from the word “although,” which means “goal” or “objective” in English.
As stated by the Online Etymology Dictionary, the term “butt” originates derived from the Old French word “bot,” which translates to “barrel,” however Gizmodo claims that “butt really derives from ‘botte,’ a Medieval French and Italian word for boot,” which eventually became “barrel.” Whatever you choose to call it, a “butt” refers to a barrel of some type.
- And it’s true that butts (seen second from the left) were formerly employed as a legitimate unit of measurement.
- Unfortunately, the actual volume of liquid contained within a tun isn’t obvious, and it probably never was.
- However, a “tun” is approximately 250 to 300 gallons in volume (or 950 to 1,100 liters).
- Would you like a full barrel of those?
- So, if you drank a literal ton of wine over the weekend, you consumed around 3,500 glasses of wine total (at five ounces or 150mL per glass).
The English village of Conisbrough has around 14,000 residents, some of whom live on a 380-foot-long (120-meter-long) road known as “Archer Way.” Fun fact: On the other hand, if you check at a map of the town from fifteen years ago, you won’t see Archer Way – the street was formerly known as “Butt Hole Road.” According to the New York Times, the butt was most likely a reference to a container of liquid; “the term most certainly has something to do with the spot’s past use as a source of water, a water butt being a receptacle for collecting water,” the newspaper writes.
However, when most people think of buttholess, they do not picture a balding man with no teeth.
Residents of Butt Hole Road, sick up with being the punchline of jokes, petitioned to have the street’s name changed in 2009. The following is taken from the archives: The Russian Torpedo Against Alcoholism (and Buttocks) is as follows: Unfortunately, these buttocks do not have a metric equivalent.
buttload – Wiktionary
Frombutt+load. Butt in this context might refer to one or both of the following:
- (Etymology 3)
- Butt (Etymology 5)
- Butt (Etymology 6)
- Butt (Etymology 7)
- Butt (Etymology 8)
- Butt (Etymology 9)
Alternatively, the name may be a corruption of the English term “boatload” or it may have been influenced by the term “boatload” (except for the specific, West Country dialect sense).
The name may also be a corruption of the English term “boatload” or it may have been influenced by that term (except for the specific, West Country dialect sense).
- (Obsolete, United Kingdom, West Country) Regional English measurement of the capacity of a heavycart (butt), which can hold 6 seams or 48 bushels of grain, which is comparable to 384 gallons.
- Provincialisms of West Devonshire was published in 1796 by Marshall, William, and is found on page 324 in the book The Rural Economy of the West of England: Volume 1. BUTT LOAD: about six seams According to Rees (Abraham), in The Cyclopaedia of Natural History, volume 31, salting, “The farmers near the fishing towns in this district also buy the refuse of bruised and small pilchards, which are rejected as unfit for curing or the market and are calledcaff,” with four cart-loads of twelve bushels each being considered as the proper quantity for an acre.” Although thebutt-load used to cost around 9 or 10 s., it is currently fetching 15 or 20 s. for the load
- A Statistical Account of the Parish of Madron, comprising the Borough of Penzance, in Cornwall,” in Quarterly Journal of the Statistical Society of London, volume 2, page 211: Edmonds, Richard. 1839July 1, Edmonds, Richard. There are several types of manure that are commonly used in this area, including seaweed, sand, stable dung, ashes, and fish dung, among others. There are so many variables that depend on the condition of the land and other factors that it is hard to say with any degree of accuracy how much is applied to an acre. It is required in one of the lease terms previously mentioned that 10butt-loadsof excellent town or fish dung, and 10butt-loadsof sea-sand (to be combined with the requisite quantity of soil) should be transported for every acre broken up for cultivation.
- “Provincialisms of West Devonshire,” by William Marshall, published in The Rural Economy of the West of England, volume 1, page 324 in 1796: ” BUCKLE LOAD: about six seams According to Rees (Abraham), in The Cyclopaedia of Natural History, volume 31, salting, “The farmers near the fishing towns in this district also buy the refuse of bruised and small pilchards, which are rejected as unfit for curing or the market and are calledcaff,” with four cart-loads of twelve bushels each being considered as the quantity proper for an acre.” Although thebutt-load used to cost around 9 or 10 s., it is now fetching 15 or 20 s. for the load. Edmonds, Richard, “A Statistical Account of the Parish of Madron, comprising the Borough of Penzance, in Cornwall,” in Quarterly Journal of the Statistical Society of London, issue 2, page 211, published on July 1, 1839: Seaweed, sand, stable dung, ashes, and fish dung are some of the types of manure that are commonly used in this area, among others. The amounts vary so widely depending on the condition of the soil and other factors that it is hard to say with any degree of certainty how much is applied to an acre. It is required in one of the lease terms previously mentioned that 10butt-loadsof excellent town or fish dung, and 10butt-loadsof sea-sand (to be combined with the requisite quantity of soil) must be transported for every acre that is broken up for cultivation.
- You can acquire a metricbuttloadof data on visitor behavior on your site without putting in a lot of work, according to Philip Greenspun’s 1999 book, Philip and Alex’s Guide to Web Publishing (page 267). The following is an excerpt from Theresa Alan’s 2004 novel, Spur of the Moment: “Anyway, they’re paying me a lot of money to do this series, and I want to share my good fortune with you, and that’s that.” Page 67 of Napoleon Dynamite: The Complete Quote Book, published by Simon & Schuster in 2005, has the following quote: “Yeah, there’s like a buttload of gangs at this school,” says the teacher.
- There are three types of loads: assload (which means “amount carried by a donkey or any huge, undetermined quantity”), cartload (which means “amount carried by a cart or any large, unspecified amount”), and truckload. Load (noun) is a category of English words that are derived from it.
- A tun (of wine or beer) contains twobutts
- A pipe (of wine or beer) holds 126 gallons or onebutt
- A hogshead (of wine or beer) contains one-halfbutt
- A barrel (of wine or beer) contains onebutt
- Barrel (of wine or beer, one-quarterbutt)
- Barrel(of wine or beer, one-quarterbutt)
- Barrel(of beer, one-quarterbutt)
The difference between a buttload, boatload and shitload.
When it comes to estimating numbers in narrative, I discovered that I’d been restricting myself for a long time. When I was younger, I believed it was normal to talk about buttloads of sh*t in polite company, but now I see it is not. Not only did I discover that I was misinformed about what a buttload truly was, but I also discovered that I had been using the phrases without respect to their true number. What was the crowd like at the supermarket? Were there boatloads or buttloads of people in line, or was it just a shitload?
- I realize this is difficult, but what if you want to explain how many legos you used to own in terms of buttocks, a boat, or a shitloads of bricks?
- You’ll have to do the conversion work yourself.
- Buttload: “A ‘butt’ is a traditional measure of volume used for wines and other alcoholic drinks, and it refers to the amount of liquid in a bottle.” Generally speaking, a butt is equal to two hogsheads, but the size of hogsheads vary depending on their contents.
- I used to believe that the term “buttload” was simply a mishearing of “boatload,” but it is really a separate unit derived from Middle Englishbote.
- As the dictionary defines it, a boatload is “the cargo that a vessel carries or is capable of carrying.” Based on the indeterminate response from the dictionary, I assume it will depend on the size of the boat in question (can be modified, huge boatload, tiny boatload).
- Despite the fact that Twenty-foot equivalent units (TEUs) are scarcely defined, “the maximum gross mass for a 20-foot (6.1-meter) dry cargo container is 24,000 kilos,” according to the International Maritime Organization (53,000 lb).
- I’ll take thrilling over anything else any day.
- So, 21,600 kg x 8,749 TEUs = 188.978,400 kg = 416,626,056 lbs (or 416,626,056 pounds divided by 7.7 pounds) equals 54,107,280 gallons (or 416,626,056 pounds divided by 7.7 pounds).
Shit Finally, here’s a really essential infographic with a ton of dropshadow that you should check out: (Click here for a larger view of this image.)
Did You Know That A ‘Butt’ Is An Actual Unit Of Measurement?
The metric system and the imperial system are the two most widely used systems for measuring distance and weight, respectively. While the metric system is used by the vast majority of countries, the United States of America is a notable outlier. In fact, we are one of just three countries in the world that continues to operate under the imperial system. (For the record, the other two countries are Liberia and Burma.) One of the peculiarities of the imperial system is that it employs several amusing phrases to describe various units of measurement.
- It’s a “butt.” The term “butt” is literally a unit of measurement for wine or whiskey barrels, and it’s true.
- Keep in mind that one imperial gallon is equal to approximately 1.2 US gallons.
- Rexness’s Flickr page Despite the fact that obsolete terminology such as butt are no longer often heard outside of vineyards and distilleries, they have a fascinating history behind them.
- Even today, if you were in Italy, you would hear the word botte used to refer to a wine barrel, which is a common occurrence.
- Historically, a butt is the equal of two hogsheads, according to the history books.
- So let’s delve a little deeper.
- The term “hogshead” refers to “a huge barrel,” maybe because it resembled a hog in appearance when it was used.
Around the same time, Parliament established a standard for a hogshead of beer, which is 54 gallons.
Other lesser-known, but no less bizarre, terms for measures include the kilderkin, which holds 18 gallons, the nine-gallon firkin (which may also be referred to as a rundlet), and lastly, a pin, which holds one pint.
When it comes to the gallon, it shouldn’t come as a surprise that there are several different types of gallon available.
For those of you who work in the wood industry, the hoppus foot, which is used to measure the volume of lumber, is the equivalent of one cubic foot.
Most likely not.
This Iranian measure of distance can refer to anything from 6,000 paces through tough terrain to 15,000 paces in bright weather, depending on the circumstances.
These terms may appear bizarre, but to be fair, how would you figure out dimensions prior to the invention of rulers, or even contemporary technology for that matter?
A hand is called after the four inches that are considered to be the average breadth of a human hand.
And, yes, you guessed it, when it comes to the feet!
Consequently, while it’s historically difficult to convert some of these old measurements since there’s little sense to the actual formulae used in obtaining them, the terms themselves and their history are undoubtedly fascinating to study.
We Saved 44 Buttloads of Wine in 2019
In this piece, we’ll explain what a buttload is and how we were able to preserve so many of them in the process.
A Short History of the Buttload Measurement
What is a buttload, and how did we manage to rescue so many of them? We’ll explain it everything in this post.
- Measure the volume of our solid waste streams
- Estimate our carbon impact, and measure how much wine waste we are able to reduce through our customers’ purchases.
Our objectives for 2020 are to increase the precision of our measurements by collecting new data. Do you want to become engaged or do you want to talk about the creation of sustainable products? Please do not hesitate to email us your suggestions. [email protected]
How much is a butt-load?
A liquid buttload is equal to 108 imperial (United Kingdom) gallons of liquid. In addition, a butt-load is a unit of weight equivalent to 2,016 pounds. The assumption that a buttload would be the same as a crap-load, or a shit-load, or anything similar, would be understandable in this context. In reality, a butt and a butt-load are true units of measurement, albeit one that is rarely used. buttnounEntry 6 of 61: a big barrel used mostly for the storage of wine, beer, and water. 2: any of a number of different liquid capacity units particularly: a unit of measurement equivalent to 108 imperial gallons (491 liters) The definition of butt provided by Merriam-Webster is The term “butt” can also refer to a two- or three-wheeled vehicle that is comparable to a wheelbarrow, according to an older meaning from Irish.
A hundredweight in the United States (or “short”) is 100 pounds (45.4kg).
Because the source of this measure above comes from an English dialect, we may presume that they were referring to the 112lb variant of the cwt.
How do the two definitions compare?
An imperial (UK) gallon is equal to 108 gallons of liquid butt-load. Another term for this weight is butt-load, which is a unit of measurement equivalent to 2,016 lb. The assumption that a buttload would be the same as a crap-load, or a shit-load, or anything similar, would be understandable and reasonable. Despite popular belief, a butt and a butt-load are legitimate units of measurement, although one that is rarely employed. The sixth of 61 entries is buttnoun, which is defined as a huge barrel used specifically for wine, beer, or water.
The Merriam-Webster definition of butt The term “butt” can also refer to a two- or three-wheeled carriage comparable to a wheelbarrow, according to an older Irish meaning.
A hundredweight in the United States (or “short”) is 100 pounds (lbs) (45.4kg).
The 112lb variant of cwt is presumed to be the origins of the aforementioned measurement because it comes from an English dialect. A British imperial buttload would weigh 2,016 lbs, making it the heaviest buttload ever produced.
Could butt-load just be a misheard boat-load?
According to some accounts, the term “buttload” is just a mispronunciation of the phrase “boatload.” However, the availability of real precise numerical numbers attributed to butt-load, in my opinion, would show that butt-load is more than just an accidental term in the English language.
‘Butt’ is an actual unit of measurement
The imperial system is a bizarre and amusing concept. It’s like, extremely amusing. The term “butt” is really used to refer to a unit of measurement for wine (or whiskey) barrels, which is rather amusing. That implies that if you fill the barrel to the brim with wine, you technically have a buttload of wine—though most people would refer to it as a full butt. Are you giggling at this point? Okay, let’s be serious for a moment. The phrases tuns and butts are no longer often used anymore, which is a shame.
- Not only are the terms taken from Old English, but they are also derived from Dutch, Italian, and French.
- At least in Italy, the term “botte” is still used to refer to a wine barrel.
- The exact volumes have fluctuated throughout the years, but we’ll go with the figures supplied by the Macallan distillery in Scotland for the purposes of this discussion.
- It is also half a tun, which is equal to 216 gallons of liquid.
- A hogshead is a container that holds half of a butt, or 54 gallons.
- The smallest size is nine gallons in capacity, and it is referred to as a firkin because, well, it is.
- Take note that these terms are employed in a measurement system that was, in essence, created by cavemen.
- In addition, good luck attempting to remember how to convert anything because the formulae have absolutely no rhyme or rationale to them.
It is necessary to enter through Facebook in order to complete the process of коммeнтированиe.