How To Seal Alcohol Ink On Wine Glasses? (Question)

  • There are just a couple of steps. Use a brush to add rubbing alcohol to the outside of the glass. Immediately add drops of alcohol ink and swirl it around. I also used a straw to blow the ink around so it would spread out around the entire glass. But this is completely optional. Allow ink to dry then apply a coat of dishwasher-safe sealant.


Do you need to seal alcohol ink on glass?

Sealing an alcohol ink piece really helps to preserve the piece for the long haul. Sealing can help prevent fading, chipping, reconstitution, and yellowing too. In a nutshell, it’s not required.

How do you seal alcohol ink on mugs?

A sealant – I recommend an acrylic spray sealant and/or dishwasher safe Mod Podge and a brush to apply it with. Always make sure to choose water-based sealants for alcohol ink to avoid smudging and smearing.

Is alcohol ink waterproof on glass?

What Is Alcohol Ink? Alcohol inks are solid-based dyes that can be used on any nonporous surface. They works well on glassware, ceramics, metal, tin, plastic, and glossy paper.

Can you use Mod Podge to seal alcohol ink?

Up first is the Glossy Mod Podge– a classic choice for sealing. It’s water based, so it doesn’t react much with the ink (except maybe from the friction of brushing it on). It goes on cloudy and dries clear and cleans up with water. It’s widely available at pretty much any store that sells craft supplies.

Are alcohol markers permanent on glass?

Alcohol-Based or Water-Based The pigments in most glass markers or paint pens are suspended in either water or alcohol, which dries once applied, thus aiding in the drying process. Alcohol markers are usually permanent, last longer, and dry more slowly than water-based markers.

Can you pour resin over alcohol ink?

Today, we demonstrate how to resin over alcohol ink! Covering alcohol ink and yupo paper with a coating of ArtResin is easy – in fact, epoxy resin takes alcohol ink next level, giving it a glossy finish and deeply saturating the colours to make them pop!

Are alcohol ink mugs microwave safe?

If I decided to use these as pen mugs, they are good to go, but if I want to use them as drinking mugs, I’ll need to seal the ink with dishwasher safe mod podge. The gold alcohol ink is made with metal particles, so don’t put it in the microwave.

Can alcohol ink be used on glass?

You can also use alcohol inks in painting and to add color to different surfaces such as glass and metals. The brightness of the color means that a small bottle will go a long way.

How do you make ink permanent on glass?

Oil-Based Sharpie Paint Markers create a semi-permanent design on glass.

  1. Allow the painted design to dry for at least 20 minutes then place in a cold oven.
  2. Heat the oven to 350 degrees, allow the glasses to bake for 20 minutes.
  3. Turn off the oven and allow the glasses to cool to room temperature before removing.

How to Seal Alcohol Ink on Wine Glasses

Alcohol inks are a form of solid-based dye that may be used to produce attractive designs on nonporous surfaces such as glassware, ceramics, and other similar materials. It is packaged in compact bottles with dropper-like dispensers, which makes it simple and straightforward to use. Their versatility allows you to produce a variety of one-of-a-kind works of art with this great instrument. Having said that, there are numerous things that individuals should be aware of when it comes to alcohol ink before attempting to use it:

  • Once alcohol inks have been applied to nonporous surfaces such as glassware, ceramics, and other similar materials, they may produce stunning patterns. These little bottles with dropper-like dispensers are simple and straightforward to use, making them ideal for beginners. Their versatility allows you to produce a variety of one-of-a-kind works of art with this great medium. Even yet, there are numerous things that individuals should be aware of when it comes to alcohol ink before attempting to use it for the first time.

Alcohol inks are a form of solid-based dye that may be used to produce attractive designs on nonporous surfaces such as glassware, ceramics, and other materials. It is packaged in compact bottles with dropper-like dispensers, which makes it simple and straightforward to use them. They are an excellent instrument that may be used to produce a variety of one-of-a-kind works of art. Having said that, there are a few things that people should be aware of when it comes to alcohol ink before attempting to use it:

Wine Glass Customization: Applying and Sealing Alcohol Ink Step by Step

Although alcohol ink is a fun artistic medium to work with, it does require a significant amount of effort to become proficient with it owing to the peculiar way it flows, dries, and mixes. There are a variety of strategies that individuals may use when working with alcohol inks, but novices would be wise to start with the stages outlined below until they become familiar with how the inks act.

Required Materials

  • Wine glasses, alcohol ink, rubbing alcohol, compressed air in a can with a straw, regular drinking straws, latex gloves, sprayable glass sealants (such as Krylon’s Kamar Varnish), and other supplies are needed. Modge Podge that can be washed in the dishwasher
  • Newspaper, aluminum foil, or a plastic tablecloth

Set Up a Protected Workspace

Because alcohol inks and compressed air produce a variety of fumes, make sure you’re working in a well-ventilated environment if you’re not doing it outside. It’s also important to note that alcohol ink stains surfaces, so make sure you work on a clean surface such as newspaper, aluminum foil, or a tablecloth before you begin painting. Make sure that all of your resources are organized in a way that allows for easy access to them at the end of the day. Because alcohol ink dries rapidly, you’ll need to work quickly while producing your personalized drawings, especially if you want to use a variety of colors.

Wash and Dry Your Glasses

It is critical that all of the dishes that you will be personalizing are clean, dry, and free of any visible film or other residue before you begin. In order to clean your glasses, first wash them with soap and water and allow them to dry before wiping the exterior of them with rubbing alcohol a final time. This should guarantee that there is no residue on the glasses that might interfere with the movement or settling of the ink during the printing process.

Alcohol Ink Techniques

You may employ a broad variety of different procedures for adding alcohol ink to an object, and some of them are more sophisticated than others. If you’ve worked with alcohol ink in the past, you may find that some application methods work better for you than others while experimenting.

You can get thorough instructions on the many approaches you may attempt as well as each step required by clicking on the link provided above. Remember that errors can be readily removed with rubbing alcohol, so don’t be concerned about flaws and instead concentrate on having a good time.

Applying Sealants

You may use a broad variety of different procedures for applying alcohol ink to an object, and some of them are more difficult to master than other. If you’ve worked with alcohol ink in the past, you may find that some application methods work better for you than others when you explore. You may get extensive instructions on the many approaches you can attempt as well as on each step involved by clicking on the link provided above: Because errors are readily removed with rubbing alcohol, don’t be concerned about them and instead concentrate on having a good time.

Wine Glass Alcohol Ink Customization: FAQ, Tips, and Tricks

In a nutshell, sure. No matter what sort of project you are working on, you will almost always need to seal your alcohol inks with a sealant. Other than that, it will be quite easy for the patterns to be whipped off or to gradually fade away via natural aging. In order to prevent this from happening, it is necessary to seal the ink, which helps to ensure that the patterns remain permanent.Related:The Pearl vs. the Cork

How Long Does it Take For Alcohol Ink to Dry?

As previously noted, alcohol ink dries quite rapidly. Or, at the very least, it dries rapidly enough that you can’t manipulate it to make new designs (typically referred to astacky dry). The onset of this condition can occur in as short as a few minutes, depending on factors such as temperature and relative humidity. Once alcohol ink has been put to a surface, it will take roughly 24 hours to completely dry. Are you looking for a set of high-quality stemware and wine glasses to serve as the focus for a dinner party that’s about to get underway?

How To Make Pretty Wine Glasses With Alcohol Ink

Since it dries so rapidly, alcohol ink is a popular choice for tattoo artists. Or, at the very least, it dries rapidly enough that it can’t be manipulated to make new designs (typically referred to astacky dry). Depending on parameters such as temperature and humidity, this can happen in as little as a few minutes! Upon application to a surface, alcohol ink will take roughly 24 hours to completely dry. Want to serve as the focus for an upcoming dinner party, but don’t know where to start looking for high-quality stemware and wine glasses?

How To Make Pretty Wine Glasses With Alcohol Ink

The first step is to wipe the glasses with rubbing alcohol. You may use as many different colors of alcohol ink as you wish. I opted to go with a simple eggplant and mango color scheme (sometimes known as purple and pink) for this recipe. There are only a few of steps involved. Using a brush, apply rubbing alcohol to the outside of the glass and let it dry. Add a couple of drops of alcohol ink and swirl it around right away. In addition, I used a straw to waft the ink around the glass, causing it to cover the whole surface area.

  1. Allow the ink to dry before applying a coat of dishwasher-safe sealer to the surface.
  2. I will certainly be experimenting with this technique on glass vases.
  3. I’d use a variety of hues, as well as lighter shades of those colors.
  4. I did, however, add a small amount of pink to the stem of the wine glass, which I think looks much better.
  5. The wine glasses have a look and feel of mercury glass to them.

Thank you for taking the time to visit! This is a great enjoyable challenge, and I hope you will take the time to see the brilliant ladies who have been included in the links below. You can view my project for the January Pinterest Challenge here.


Register for the March Pinterest Challenge by visiting this link: March Pinterest Challenge Sign-up

You might be interested:  Which Wine Has The Least Calories? (Question)

Now let’s see what other things Pinterest inspired! Head over and visit the other hosts to see what they crafted, cooked, built, or tried!

My Pinterventures with Erlene Intelligent Domestications, by Shirley Marie –Do It Yourself Adulation Lisa –Bloghetti is an Italian actress and singer. Jenny –Cookies, please! Crafts and coffee are two things that come to mind. Our Unschooling Adventure with Joanne Lauren –Mom at Home Educator Roseann is the author of This Autoimmune Life. Rebecca –Uncomplicated, Practical, and Stunning Beverly – Across the street from the Blvd. Debra – Shoppe Number Five Gwen –Geez, Gwen! What are you thinking?

Emily –Hunny, I’ve returned home.

Greetings, Central Avenue, Rebecca.

My name is Lynne, and I come from a large family.

Alcohol Ink on Glass Sealant Test

What is one of the most often asked questions I get regarding alcohol ink is “How do I seal that” or “What should I use to seal it.” The same thought comes to me when I see other inkers on Instagram or Pinterest and think to myself, “I wonder what they used to seal it with?” Sealing glass alcohol ink projects is significantly more difficult because the finished result must retain its shiny and translucent appearance.

  1. In the past, I’ve just avoided sealing my craft products because I was concerned that the sealer would either destroy the ink or harm the glossy sheen.
  2. As a result, I dug up all of my sealants (well, I do have a couple more versions of regular spreadable mod podge, but I picked the one I thought would work the best and most easily on glass).
  3. I’m sure there are a plethora of other comparable goods available, but these eight are a great place to begin your research.
  4. These memory keeper slides appeared to be an excellent pick.
  5. To get this effect, I chose four colors of ink that I believed would have nice saturation on glass and dripped them onto the slide, spreading them with a little paint brush to ensure that the entire slide was fully covered, and then flamed them to set and spread the ink.
  6. As I was inking them, I saw that the backs of the glasses had a significant amount of ink on them.
  7. I left them aside to dry overnight, but because it has been raining off and on here, it took two days to completely dry them.

As long as they are entirely dry, there is little possibility that the ink will react with the sealer.

72 degrees and windy!

I applied a thick layer of paint to each of the two paint-on versions and placed them aside to dry.

I shook each container quickly before sprinkling a few hefty passes across each slide with the spray gun.

I let them all dry on the patio table for about 20 minutes before spraying (and painting) a second coat of paint on top of everything else.

After they were cured, I put them through three tests to judge the quality of the finish: water, alcohol, and fire.

Afterwards, I spritzed it with just enough rubbing alcohol to examine if the surface had been fully saturated and if the sealant had reacted in any way.

The GlossyMod Podge is the first product on the list since it is a traditional choice for sealing.

Once applied, it goes on hazy and dries clear, and it is easily removed with water.

On glass, however, it leaves clear brush strokes that might appear a little sloppy, and the finish can disintegrate a little bit when wetted down with water.

However, extended contact with water can cause the Mod Podge to become slippery, and persistent contact with water can cause it to become sticky.

Nothing happened when the flame was turned on.

It has worked well on various opaque projects, and I’ve even used the dishwasher-safe version of Mod Podge on a plate without incident.

D is the grade.

It’s the Triple Thick Gloss Glaze from DecoArt/Americana.

In addition to suffering from the same brush stroke concerns as the Mod Podge, it also removed a significant amount of ink from the slide during the application process.

Alcohol Ink on Glass has a grade of F, which means it is not recommended.

The first product on the list is Mod Podge Gloss Acrylic Sealer.

I was aware that Glossy would provide a superior gloss on glass, so I purchased some to experiment with.

Once the finish had dried, it appeared to be a little splotchy.

It appears like the ink did not get a complete seal around it.

Alcohol Ink on Glass has a rating of F, which means it is not recommended.

Despite the fact that the finish is hazy and matte, it performed admirably in all of the tests.

Rating: B (since, for the most part, you aren’t seeking to make your glass products seem fuzzy and foggy, but if you are, this stuff is fantastic) Following that, we’ll be putting a range of Krylon sprays to the test.

In the spray paint area of the hardware store, I believe I purchased this particular model.

It also dried with a mottled appearance.

I’ve used this spray very lightly on a ceramic tile project in the past and was able to get little response with the ink, but the sealer began to yellow and flake off as the piece aged, so I stopped using it.

My expectations were about to be dashed by the outcomes, but then along came the venerableKamar Varnish to save the day.

Although this product applies similarly to acrylic sealers, it has a little stronger odor, so be sure to work in a well-ventilated place when using it (outside would be best).

The clarity of the finish on the glass was particularly surprising.

There were no alterations or responses as a result of the fire.

In addition, this type of product is typically found in the art supply or craft department of a store rather than being shown alongside the spray paint.

No modifications were made to this product during the water, rubbing alcohol, and flame testing.

(as long as you use a gentle hand when spraying) This final one is a little bit of a wild card in the game.

When I put the ink on it, I was expecting it to respond.

I was expecting at least one or two of them to turn yellow or get sooty, but they all seemed to be alright in the end.

It exhibited practically little reactivity to the ink and had a delightfully smooth and polished surface, which was really stunning.

After careful consideration, I do not advocate using alcohol ink on glass with the DecoArt/American Triple Thick Gloss Glaze, the Mod Podge Clear Acrylic Sealer, or the Krylon Covermaxx Acrylic Spray.

And if you’re looking for a matte finish with a faint frosted appearance, the Mod Podge Matte Acrylic Spray can do the trick.

When utilizing spray sealers, there are a plethora of aspects to consider (like temperatures and humidity levels when sprayed etc.).

The items that did not pass this specific test may (and most likely do) perform admirably in other mediums.

What exactly did I miss? Does anyone know of a sealer that you use with alcohol ink that I could experiment with? Please share your thoughts in the comments section!

How to Use Alcohol Ink on Glass

I’ve experimented with alcohol ink to make one-of-a-kind DIY creations ranging from metal necklaces to glass candlesticks! Pam Larmore is a writer who lives in New York City.

Decorating Glass With Alcohol Ink

Metal necklaces to glass candleholders are just a few of the DIY creations I’ve created with alcohol ink. Tammy Larmore is a professional photographer who specializes in fashion and beauty.

What Is Alcohol Ink?

These solid-based colors may be applied to any nonporous surface and are known as alcohol inks. They are effective on a variety of surfaces including glass, ceramics, metal, tin, plastic, and glossy paper. Because their surfaces are permeable, wood and standard card stock paper will not perform well in this application. The medication is packaged in a container with a dropper-style dispenser, making it simple to apply. Keep in mind that it dries rapidly, so you’ll need to work swiftly if you want to finish your design on time.

A few notes about using alcohol inks on glass:

  • Using a moderate dishwashing detergent, wipe the surface of the glass and remove any labels before beginning your construction job. Allow it to dry thoroughly before commencing the DIY project in order to achieve the cleanest appearance possible
  • Alcohol ink stains! However, the good news is that it wears off very soon. The use of rubber gloves can help to prevent this, but I find it difficult to hold the glass while wearing them
  • Don’t be concerned about making errors. You may clean them up with simple rubbing alcohol that you can get at the drugstore. This product should not be used on glassware that will come into contact with food or beverages. Decorative purposes should be the only thing you utilize it for. Using alcohol ink in conjunction with compressed air results in a significant amount of fumes. Assure that you are in a well-ventilated environment whether you are indoors or outside (if the weather is pleasant). The splatter method is most effective when used with smooth glass containers. You should consider different options if you wish to utilize cut or embossed glass
  • Otherwise, you should stick to the traditional procedure.

The Spatter Technique

It is possible to generate a number of effects using alcohol ink by using it in a variety of ways. You will want the following materials in order to complete the splatter technique.


  • Glassware, canned pressurized air with a straw, alcohol ink, rubbing alcohol, and other supplies

That’s all there is to it! Let’s get started on the decorations.


  1. Squeeze a few drops of ink onto the glass using your fingers. Three drips are generally sufficient to cover a large area. Spray the ink with compressed air as quickly as possible to produce a splatter pattern. It is critical to utilize the straw in order to direct the air exactly where you want it to go. Changing the angles will produce varied outcomes, and as the colors run together, they will merge and blend together to create new hues. Because the ink dries rapidly, it’s a good idea to collaborate with a friend on this project! Because it was quite windy outdoors, my aunt and sister-in-law are working together in the shot below, which you can see below. They each had a different task: One held the vase and dropped the ink, while another sprayed pressurized air. Upon completion of the design, apply at least two coats of transparent acrylic sealer to the glass to protect it from further damage. Spray thin layers to prevent the paint from running or dripping onto the project. Make careful to apply it in an area that is adequately ventilated. Rustoleum and Krylon provide sealants in a variety of finishes, including matte, satin, and glossy, depending on your preference.

A few droplets of the ink should be squeezed out and placed on the glass as shown. When using three drops, a large area is generally covered; Compressor-air-spraying the ink quickly will produce a splatter pattern. It is critical to utilize the straw in order to direct the air exactly where you want it to be directed. The colors will merge and generate new hues as they are run together, and you may play with the angles to achieve different outcomes. Due to the rapid drying time of the ink, it’s a good idea to collaborate with a friend!

They each had a different task: One held the vase and spilled the ink, while another sprayed pressurized air; Finish by applying at least two coats of clear acrylic sealant to the glass after the pattern is complete.

When applying it, make sure the space is sufficiently aired.

DIY Glass Project Ideas

It’s a satisfying pastime to paint with alcohol ink on thrift shop items, and this project is simple and affordable to put together! Those brandy snifters were recovered from a thrift store for a shocking ten cents apiece. Consider all of the vases, pottery, and glassware that can be purchased at a low cost to create them! A wide range of glassware is available at the dollar shop as well. When I went to look, they had four different varieties of votive candles, three different types of vase designs, and clear dinner plates.

Because alcohol ink should not be used on foods that are intended for consumption, you may design the back of the plate, seal it, and use it to display baked goods such as cakes or cookies. Pam Larmore’s designs on glass were created using alcohol ink.

Where Can You Buy Alcohol Ink?

Most craft stores have alcohol ink, which may be purchased in bulk. If you don’t want to go outdoors, you can get a broad choice of hues at reasonable costs on eBay and Amazon, respectively. After a few weeks of experimenting with them on glass, my daughter and I realized that we needed more alternatives, so we acquired nine more colors from eBay to add to our collection of over a hundred. My favorite colors are the bright, cheery ones, whereas my mother prefers the autumnal, earthy tones.

You might be interested:  How To Make Wine From Grapes Juice? (Perfect answer)

Read More From Feltmagnet

Lettuce, Wild Plum, and Stream are the colors that were utilized to create these candleholders. I’m excited to experiment with gold, orange, and dark green, which are all fantastic summer hues. The bottles aren’t very large, but they hold a lot of liquid. An extremely handy color chart can be found in the Enchanted Gallery, which displays all of the colors that are currently accessible, as well as unusual color combinations and the consequences of putting alcohol ink on certain things. Pam Larmore is a writer who lives in New York City.

Do You Like the Look of Alcohol Inks?

Daphaneon July 25, 2020: I really like the concept and appearance of alcohol ink. I’m eager to get started right now. Posted on July 4, 2020, by Audrey Hunt from Pahrump, Nevada: This is a method I’ve been dying to attempt for a while, but I needed your essay to guide me through the process. As a result, thank you very much for sharing this! Cindy Cerokyon is a woman who works in the fashion industry. The 29th of October, 2019: Using alcohol and a cloth, is it possible to remove the product off a window pane?

  1. Is there a certain palette of colors, methods, or stamps that I should use to get started?
  2. Dxieon The 12th of June, 2018: I’m only getting started, but I really like the appearance.
  3. due to the fact that the water takes the color from glass pamon How do you seal the ink?
  4. July 22, 2017: Baton On December 19, 2015, I sprayed transparent krypton satin spray over an alcohol ink wine glass pattern that I had created.
  5. What exactly did I do incorrectly?
  6. Is this going to be the way they feel for the rest of their lives, or will it go away with more drying time?
  7. BetsiGoutal1on Wednesday, March 3rd, 2013: This is a fantastic lens.

Thank you for your contribution.:) Carpenter76on The 22nd of February, 2013: That piqued my interest!

Thamisgithon I really like the glasses that you found at a thrift store on January 12, 2013.

On January 11, 2013, Judith Nazarewicz wrote to us from Victoria, British Columbia, Canada: I really like the way the alcohol inks appear on glass!

Thank you very much!

Michey LMon (Michey LMon) The 23rd of December, 2012: Excellent information on the use of alcohol inks.


And while you’re at it, make sure to enjoy yourself!

anonymouson November 29, 2012: I had no idea that you could create art with booze!

Thanks for your help.

Vikkifrom the United States on November 15, 2012: “I really like the style!” Unusual in many ways.

pamlenon Posted on October 09, 2012: These are such gorgeous crafts, I think I’ll give this one a shot.

Prior to reading your lens, I was completely unaware of the existence of alcohol inks.

On August 16, 2012, TonyBdahlia369 wrote: It appears like this painting on glass using alcohol inks will be a lot of fun, which is something I am quite interested in.

I’d never heard of alcohol ink before this.

It’s also brightly colored.

anonymouson August 9, 2012: Thank you, thank you, and thank you again!

It’s encouraging to see alcohol being put to beneficial use.

It was better than I had anticipated.

san onymouson July 06, 2012: Wow, this is incredible.

I appreciate you taking the time to create such an excellent lens.

I really like the look of alcohol ink on glass.

Thank you very much for making this information available.

Caromiteon June 24, 2012:I really like your candle holder glass – it’s very bright and cheerful, and it makes me smile.

This is excellent information.

Terrie Schultzon June 08, 2012: Absolutely stunning!

I would make certain you get a sealant that is suitable for outdoor usage and is waterproof.

Thank you for taking the time to visit:) anonymouson The sixth of June, 2012: Beautiful!

I’m thinking about applying the technique on the clear panes of an ancient window to create the appearance of “stained glass,” but I’m not sure how it would work.

It would have to be able to withstand rain and heat.

Spiderlily321on The 5th of June, 2012: These are quite interesting.

Thank you for your contribution!

I’d want to give it a shot at some point in the future.

CameronPoeon Wednesday, June 3rd, 2012: I believe that utilizing alcohol ink to decorate glass is a fantastic technique for doing so.

I’d love to try my hand at anything using alcohol ink!:) CyberTech LMon Tuesday, June 02, 2012: I believe I have discovered a new hobby!

Making a three-foot square for my wall would be fantastic.

I had no notion that alcohol could accomplish such a thing.

Thank you for your contribution.

Thank you for sharing such a brilliant concept.

belle88on June 01, 2012: I just saw that, so it’s new to me, but it’s valuable information: Dpeggygallyoton I had no idea there was such a thing as alcohol ink until recently.

psiloveyou1 (author) posted the following on May 31, 2012:@ LM: Lindasc333 LM: Lindasc333 LM: Lindasc333 LM: They look stunning when placed outside during the day with the sun shining on them and when lit by candles at night.

ryokomayukafrom the United States of America on May 31, 2012: Those are some lovely glasses.

Those are some excellent suggestions.

Thank you for your contribution:) Lindasc333 said on May 31, 2012: “Excellent lens!” I have a collection of ancient jars that were formerly used to hold candles.

katierosson May 30, 2012: These appear to be fantastic!

Nimsrules LMon May 30, 2012:Wonderful display of originality.

Thank you for your contribution.

This is something I’m going to have to attempt.

UKGhostwriteron May 29, 2012:Excellent lens – it’s been pinned as well!

Norton, a resident of Ontario, Canada, wrote on May 29, 2012: Interesting.

On May 29, 2012, Stephen Bush from Ohio said this: SquidAngel Blessings on a lens that is both entertaining and interesting.

Danfrom CNY said on May 29, 2012: “Congratulations for being featured.” Close2Art LMon May 29, 2012: These are some really interesting designs!

The following is from SquidooPower on May 28, 2012: This is quite intriguing, thank you.

Thanks for sharing your ideas.

What a brilliant concept!

Beautiful crafts made using alcohol ink!

Congratulations for being featured on the homepage!


Thank you for making this available.:) Lynda Makarafrom California commented on May 27, 2012: “These are just stunning.” I really like the colors!

On May 27, 2012, Ellen Gregory from Connecticut, United States, wrote: These are very stunning hues.


Before today, I had never heard of alcohol inks, and the inks on glass are absolutely stunning.

on May 27, 2012, psiloveyou1 (author) wrote:@anonymous: Thank you, Tipi; things are starting to come together on Squidoo:) On May 27, 2012, psiloveyou1 (author) tweeted: @purpleslug: Thank you for taking the time to visit!

What a low-cost and beautiful method to create beauty, and congrats on being featured on the main page of the newspaper.

purpleslugon May 27, 2012: I really like the way it looks!

On May 25, 2012, psiloveyou1 (author) tweeted: “@sharonbellis: With the exception of the mess, it’s a rather simple process:) On May 25, 2012, psiloveyou1 (author) tweeted: @WriterJanis2: Thank you very much!

On May 24, 2012, Sharon Bellissimo from Toronto, Canada, wrote: Wow, stunning patterns, as well as a well-made lens with simple-to-follow instructions.

VeseliDanon May 21, 2012: I truly enjoy the designs you’ve created!

*blessed* On May 21, 2012, psiloveyou1 (author) tweeted: @kristalulabelle: It’s both entertaining and dirty!

Thank you for your contribution!

We’ve been experimenting with a new technique, which I’ll have to share with you as soon as I can.

Bensen32 is a lmon.

Thank you for the suggestion; I’ll have a look at it.

Little Linda Pinda, a resident of Florida, wrote on May 11, 2012: It’s really lovely.

Thank you for introducing me to this artistic method that was previously unknown to me.

He wants to sell plants in containers that we can find at the countless thrift stores down here, so this might be something he can try as well:) Thank you very much for making it available!

I’m going to have to give this a shot!

It’s a really amazing lens:) jballs6on May 03, 2012: I used to design stuff for around the house some years ago, and reading your blog has given me the inspiration to get it up again.

Exceptional suggestions anonymouson May 02, 2012:Extremely effective technique!

jhollandon April 28, 2012:Wow, that’s awesome!

MelonyVaughanon The 28th of April, 2012: What a simple and enjoyable method.

Thank you for your contribution. Peggy Hazelwood wrote on April 27, 2012, from the Desert Southwest region of the United States of America: These are absolutely fantastic! I’m sure they’re even more beautiful with a candle burning inside them!

Create Stunning Alcohol Ink Glassware Easily and Inexpensively – Video

This 5 hour videocourse will teach you how to make beautiful wine glasses and glassware using alcohol inks and Dollar Store finds. (There are no materials included in this course.) Make fantastic one-of-a-kind presents for yourself or for others by combining two or more techniques. Wine glasses, stemless wine glasses, and more are available. Learn how to apply alcohol inks to glassware using a variety of techniques in this lengthy video tutorial. You will also learn how to correctly seal wine glasses and stemless glassware to ensure that they retain their long-lasting beauty and durability.

These techniques may be used to a variety of items, including vases, mugs, plates, decorations, and more!

This is a video-based course that you can watch and learn from at your own pace whenever you choose.

The course curriculum consists of 13 lectures that cover a variety of topics such as a supply list, several techniques such as crackle, embellished with drawing, glitter glass, waterfall glass, how to save a’reject’ project, and more, as well as sealing and protecting your glassware and other materials.

Finish the course with marketing advice for individuals who want to learn how to sell their own works after they have completed it.

* To gain access to the course, either click on the “Go to Course” button in your confirmation email or on the “Alcohol Inks Glass Class Course Entry” link in the menu.


How to Seal Alcohol Ink Art

When it comes to getting started with alcohol ink painting, one of the most often requested questions is how to seal the alcohol ink. To seal and protect your alcohol ink artwork, Laurie “Trumpt” Williams demonstrates one of the most common and well-tested ways available today. The following products are discussed in this presentation:

  • Krylon Kamar Varnish (Krylon UV Resist (Krylon Triple Thick Spray (Triple This Brush on Glaze (Golden MSA Varnish (
  • Krylon Kamar Varnish (Krylon UV Resist (Krylon Triple Thick Spray (Triple This Brush on Glaze (Golden MSA Varnish (
  • Krylon UV Resist (Krylon Triple Thick Spray (Triple This Brush on Glaze (Golden MSA Varnish (

Join the Alcohol Ink Art Community and/or the Society for Alcohol Ink Art. *********************************************************** It is highly suggested that you apply many coats of UV protectant to help resist fading. While applying the UV protectant directly to alcohol ink will cause the inks to activate and migrate, applying the UV protectant indirectly will not. This is due to the fact that many UV varnishes and protectors contain isopropyl or acetone as solvents. Consequently, it is critical to choose a sealer that will not reactivate any inks that have been previously applied.

Note that Kamar® Varnish is UV stable, which means that it will not be broken down by exposure to ultraviolet light (UV exposure). However, this does not imply that the artwork that inspired Kamar® is UV protected. As a result, the use of a UV protectant in the second stage is required.

Step 1.Krylon Kamar® Varnish.

Begin with a piece of alcohol ink art that has been properly dried. Allow at least 24 hours, if not more, for the most effective benefits. Apply 2-3 light coats of paint on the artwork in a well-ventilated area at a distance of 12-14 inches from the subject, giving 30 minutes to an hour of drying time between each application. Allow for thorough drying of Kamar® before moving on to step 2 of the process. The Krylon website claims that it takes around 2 hours, however I have found that it takes longer depending on the humidity levels in the room.

If you are spraying outside, move the artwork indoors where the humidity level is lower after a couple of hours so that it can dry.

You might be interested:  How Many Oz In A Glass Of Wine? (Solution found)

Step 2.UV Protectant(Krylon® UV-Resistant Clear Coating, Golden® Archival Varnish with UVLS or other)

Spray 2-3 light coats of paint outside or in a very well-ventilated location, letting an hour between each application to dry completely. The amount of moisture in the air will influence the drying time. Notice that Golden utilized 6 applications of UV spray in their tests, which was rather extensive. After three layers, I come to a halt.

Step 3.Finishing (optional)

Working with tile or artwork on board, you may wish to polish the piece with a gloss media to give it a shiny appearance while also providing additional protection. Art ResinTM, Americana® Triple Thick gloss glaze, Krylon Preserve It® Spray, Gloss Finish and Americana® Triple Thick gloss glaze are some of the more popular options. Before applying a finish to the artwork, ensure that it has had adequate time to dry and cure following the completion of stages 1 and 2. Please keep in mind that Art ResinPreserve It® Spray provides extra UV protection.

It is a community of artists who work with or wish to learn to work with alcohol ink as an art media, and it is hosted by the Alcohol Ink Art Community.

DIY Alcohol Ink Pitcher and Glass Set

This article may contain affiliate links or sponsored content. Please see the disclosure policy for more information. That means that the price for you will remain unchanged, but I will earn a few pennies to cover the cost of keeping the lights on and feeding the cat. This DIY Alcohol Ink Pitcher and Glass combo will let you create something to amaze this summer! A fantastic choice for a backyard bash or a watercolor paint and sip session!

This post may contain affiliate links. Shopping from these links means that the price stays the same for you but I get a few pennies to keep the coffee pot full and possibly the cat fed.

Summer has officially here! Pool parties, backyard stargazing, picnics, and breakfast are all on the menu. All were dressed in wide-brimmed hats and flowing skirts. It also means that summer beverages and entertaining barware are ready to be enjoyed! Okay, so it’s probably no secret that I’m a sucker for watercolors and alcohol ink. I simply adore the way they appear to be all bright and smoky! For this alcohol ink pitcher and glass set, I kept it bright and vibrant by using three primary colors and a simple application of dishwasher-safe mod podge to adhere everything together.

  • That’s all there is to it!
  • Simply embrace your wacky side and use splotches, drips, or anything you like to decorate your drink before serving it to yourself and a few of your favorite friends!
  • Project to be completed during the weekend When working on the project, it’s like a 4, but afterward, when you’re sipping margaritas, it’s certainly a 10!
  • Pads made of cotton A paintbrush is a tool that is used to apply paint to a surface.
  • Begin by wiping off your pitcher and glasses with rubbing alcohol and a cotton pad to remove any residue.
  • Turn the pitcher or glass over down and start working.
  • Next, using a paintbrush or the tip of the ink, paint alcohol ink onto the portion of your pitcher or glass that has been designated.

However, blowing on it with a straw or blowing on it might help it dry faster and ensure that the ink does not run any further than you want it to.

Allow your glasses and pitcher to dry for around 2 hours once you are satisfied with them.

As soon as the ink has dried, lightly paint a thin coating of dishwasher-safe modpodge over the ink, staying as far away from the glass’s rim as possible.

You’re meant to let this cure for 28 days in order for it to harden, but if you’re impatient like me, you can cure it in the oven instead of the refrigerator.

Set your things on a baking sheet and place them in a cool oven.

Turn off the oven and set your pieces aside to cool in the oven for a few minutes.

Most of the time I do this before I go to bed so that they have time to cool over night. Once your pieces are finished, they are dishwasher safe on the top shelf! Make delicious margaritas and spend the rest of the day entertaining your guests! Don’t forget to PIN this page for later use!

Food Safe Dishes with Alcohol Inks – DIY Colorful Dishes Tutorial

I created a post on using Stazon inks and stamps to decorate plates a very long time ago, and it hasn’t been updated since. (It was one of my very first blogs on The Artisan Life, and it still stands today!) Over the years, it’s gained enormously in popularity. One of the most often requested topics is whether or not the stamped surfaces are suitable for use in the food preparation industry. Personally, I’ve never felt comfortable eating from the stamped areas of any adorned plates, and I believe you’d be quite likely to ruin the pattern if you tried.

This sparked an amazing thought.

This post may include affiliate links, which means that if you make a purchase after clicking on one of these links, I may receive a commission at no additional cost to you.

Again, you have the option of blending the colors or using only one color each piece; the choice is yours.

Materials needed for food safe dishes with alcohol inks

  • Alcohol inks are a thing! There are various different kinds, but I personally own and use Ranger Adirondack
  • Alcohol ink blending solution (also known as rubbing alcohol)
  • Alcohol ink applicator
  • And a variety of other supplies. Dishes made of glass
  • Optional, but highly encouraged, is the use of foil to protect your work surface. I recommend using an acrylic spray sealer and/or dishwasher-safe Mod Podge, as well as a brush to apply the sealant
  • Always choose for water-based sealants while working with alcohol ink to avoid blurring and smearing of your work. Krylon “Short Cuts” and Krylon Kamar Varnish are two products that are commonly used with alcohol ink, although you may need to experiment to see which product is the most effective for you and your project. In order to prevent smearing, it is recommended that you leave your ink to cure for up to a day after application of the sealant.

Always use water-based sealants while working with alcohol ink to avoid blurring and spreading of the ink. If you’re using alcohol ink, Krylon “Short Cuts” and Krylon Kamar Varnish are both good choices. However, you may have a little experimentation to figure out which works best for you and your project. Allowing your ink to cure for up to a day, regardless of which sealer you choose, can help it not spread.

  • Acid-free dye ink that is permanent, fast drying, transparent, and specially formulated to provide a vibrant, polished stone appearance. Use on slick surfaces like as glossy paper, dominoes, metal, foil, shrink plastic, glass, and other similar materials. Flamingo, Patina, and Amethyst each contain 5 fluid ounces of product.

How to make food safe dishes with alcohol inks

To begin, make sure your dish is dry and free of debris and stains. I highly recommend washing off the exterior of the container with a paper towel and alcohol ink to ensure there are no residues, oils, or other anything that might interfere with the ink’s performance. Protect your work surface at all costs! Alcohol ink has a staining effect. Inquire as to how I know this. I recommend putting a sheet of aluminum foil with the corners gently folded up to ensure that nothing drips off and onto your table during baking.

  1. You will only be using alcohol ink to paint the outside of your dish at this point.
  2. If you want to apply the ink quickly, I recommend soaking the outside of your dish with blending solution or rubbing alcohol first, then working quickly with your applicator or simply pouring the ink on.
  3. You may simply dab the inks on directly without creating a solution first if that is more convenient for you.
  4. In order to achieve more bright colors, apply additional layers of ink after the underlying application has dried or is almost dry.
  5. After spraying the exterior of your dish with a sealer and allowing it to cure completely, I strongly recommend applying dishwasher safe Mod Podge to the inside of your dish to protect it from scratches and dents.
  6. Although you are not need to seal the dishes, doing so will help the inks remain longer!
  7. ).
  8. I’m in love with these bowls, and I’m determined to make some matching glasses as soon as possible!
  9. If you don’t happen to have any glass dishes lying around, you can always execute this project using recycled jars to create some wonderful vases or storage cups for pencils, paintbrushes, and other small accessories.

If you’re seeking for even more repurposed glass jar inspiration, check out my list of upcycled jar DIY techniques! You’ll find a wide selection of tasks for jars of all shapes and sizes. What was the most recent item you upcycled?

Alcohol Ink Painting On Glass: Hot Tips & Techniques!

Alcohol ink is used to transform empty picture frames, glass vases, wine glasses, glass decorations, and other glass items into beautiful pieces of stained glass art in minutes. Have you ever wanted to learn how to paint with alcohol ink on glass to create stunning stained glass artworks? When applied to practically any non-porous surface, alcohol ink looks wonderful, and it looks especially stunning on glass! With this approach, you are effectively making stained glass, which increases the vibrancy and sheen of the inks even more than they already are.

What Do You Need To Paint Alcohol Ink On Glass?

And the best part is that this method couldn’t be much easier to master! Nothing except a glass surface, such as picture frame with a glass pane, vase, and an excellent set of alcohol inks will enough for this project. To speed up the drying process, you may wish to use some canned air and/or a straw to blow on the inks and stir them about a little. Using a light detergent, thoroughly clean the glass surface, removing any filth, smudges, or oils that have accumulated. After that, let it to dry fully.

However, we find it beneficial to lightly cover the whole glass surface with a coating of clear blending solution to aid in blending and allowing the inks to flow more smoothly.

Step 4: Allow for drying time, and you’re finished!

Techniques For Painting Alcohol Ink On Glass:

Multiply the number of glass panes you use when painting to achieve a magnificent three-dimensional layered effect on the surface of the glass panes. It is possible to get extremely dramatic effects when the light shines through the several panes of glass and the colors layer over one another! Consider flipping over one pane of glass (to protect the artwork) and putting a vinyl phrase to the glass to spice up your project even more. Live, Laugh, Love: When working on a picture frame, consider placing a bright white surface behind it to make the alcohol inks on glass stand out even more.

To properly appreciate the shine of these pieces of art, make sure they are displayed in regions that receive lots of natural light.

NOTE: Because sunshine may cause any colored ink to fade, it is recommended that you store your artworks away of direct sunlight when possible.

After laying down their inks, while they are still wet, they will use a lighter to burn off the extra alcohol and produce burned glass effects, which they will then wash away.

Please be certain that all necessary fire-safety measures are followed and that there is nothing combustible anywhere near where you will be working before beginning.

Use Masking Fluid: When painting on glass, masking fluid might be your best buddy because it works so well.

To see the full effect of your lovely colors when you have done laying them on, remove the dried masking fluid.

Their intensely colored vibrance results in stunning works of art, and only a few drops are needed to create a stunning effect!

If at first you don’t succeed, don’t be discouraged! Simply clean the glass with isopropyl alcohol, alcohol wipes, or clear blending solution, then start over with the process. Because it is non-porous, the ink will not seep into the paper, and it will be as good as new in no time.

The Last Word

Painting with alcohol ink on glass is a lot of fun, and it’s a terrific activity for artists of all skill levels. The entire procedure could hardly be more straightforward. Floating picture frames, decorations, glass beads and pendants, glass vases, the outsides of glasses, and other items may all benefit from this approach. Do you have any more suggestions? Please share your thoughts in the comments section!

Leave a Comment

Your email address will not be published. Required fields are marked *