How To Open Wine Without Wine Opener? (Correct answer)

8 Ways to Open a Bottle of Wine Without a Corkscrew

  1. 1 – Use a Screw (the Longer the Better), a Screwdriver, and a Hammer.
  2. 2 – Push the Cork in With the Handle of a Wooden Spoon, or Any Blunt Object Similar in Size.
  3. 3 – Hook ’em With a Hanger.
  4. 4 – Pump It Out.
  5. 5 – Twist It Out With Keys or a Serrated Knife.

dailymail.co.uk

  • One of the easiest ways to open a bottle of wine without a bottle opener is to use your car keys. While it may seem like a strange idea, you can use your keys to open the door of a wine bottle because they have a clip that allows you to close the door while the key is inside of the bottle.

Contents

How do you open a wine bottle with a key?

Open Wine Bottle With a Key Insert a key, preferably one you have extra copies of, at a 45 degree angle into the cork until most of it is inserted into the cork. Then begin twisting the cork up as pushing up with the key until you get the cork out. Be careful because a weak key has a possibility of breaking.

Can you open a wine bottle with your hand?

Hold the bottle’s base steady against your body and place your palm over the cork firmly. Start to slowly twist the base of the bottle. Keep hold of the cork and gently pull as it loosens. Hold on tightly to make sure it doesn’t pop out of your hand.

What is the fastest way to open a bottle of wine?

The Right Way to Open a Bottle of Wine

  1. Cut the foil below lower lip.
  2. Insert the screw in the center of the cork.
  3. Rotate corkscrew 6 half turns.
  4. Lever cork out slowly.
  5. Wipe off any tartrate crystals or sediment with a napkin.

How do you open a wine bottle with a fork?

Insert the screw in the middle of the cork like you would with a corkscrew. Don’t screw it in fully, leave a small space to use a fork as a lever and pull out the cork. Simple as that! Now you can enjoy your glass of wine.

How do you open a wine bottle without a corkscrew?

8 Ways to Open a Bottle of Wine Without a Corkscrew

  1. 1 – Use a Screw (the Longer the Better), a Screwdriver, and a Hammer.
  2. 2 – Push the Cork in With the Handle of a Wooden Spoon, or Any Blunt Object Similar in Size.
  3. 3 – Hook ’em With a Hanger.
  4. 4 – Pump It Out.
  5. 5 – Twist It Out With Keys or a Serrated Knife.

Can you open a wine bottle with scissors?

Scissors. Stick one shear of the scissors as far into the cork as possible. Then, while holding the handle of the scissors, twist and pull down on the wine bottle until the cork comes out.

What can I use if I don’t have a wine opener?

If you have a toolbox handy you can jerry-rig your own way to lever the cork out of the bottle. If you have a long screw (the longer the better), a screwdriver and a hammer, you’re in business. Just use the screwdriver to twist the screw into the cork (using the same motion as you would with a corkscrew).

How do you open a wine bottle with hot water?

8. Heat the wine bottle up method

  1. Put a pan of water onto a boil.
  2. Take the pan off the heat once the water has begun to boil.
  3. Place the bottle of wine (having removed the foil cover) into the hot water and wait for the cork to slide out of the bottle.

8 Ways to Open a Bottle of Wine Without a Corkscrew

Any wine store customer is presented with a decision: should they purchase a bottle with a cork closure — which is more romantic, but needs more work to open — or should they choose for a bottle with a screw cap, which is more convenient? There’s no need to be concerned if you choose the first choice and then discover that your corkscrew has vanished while you were out drinking. The truth of the matter is that there are more ways to open a bottle of wine than there are to close one. Immediately after that, I’d want to point out that none of these strategies are 100 percent foolproof.

If you have an unique and/or costly wine that would break your heart if it were to be damaged during this process, we recommend that you wait until you have a corkscrew on hand before proceeding.

Do you require assistance with opening a beer bottle?

Don’t let a drop pass you by!

1 – Use a Screw (the Longer the Better), a Screwdriver, and a Hammer

Our is arguably one of the safer techniques on this list, but it does need a certain amount of resilience and strength, since it has the potential to exhaust you quickly. Simply take a screw (ideally a large one) and screw it into the cork with a screwdriver until only about an inch or so of the cork is visible. Afterwards, you take the backside of the hammer and lock it under the screw, then you pull the cork out of the screwhole. Once the assignment is completed, you may also want a towel to wipe the perspiration off your brow and forehead.

2 – Push the Cork in With the Handle of a Wooden Spoon, or Any Blunt Object Similar in Size

Our is also a rather safe way to employ when compared to some of the other methods on this list, but it does have some drawbacks that should be considered. The handle of the wooden spoon (or any similar instrument) should be used to press the cork down into the bottle of wine in order to open the bottle. It is unfortunately quite hard to remove the cork from the bottle once it has been pushed into the bottle. Furthermore, if the bottle of wine is old, the cork may crumble and shed into the liquid as it is placed into the bottle.

To remove the cork bits from the bottle of wine, just strain it through a sieve and pour the wine into a decanter.

3–Hook ‘em With a Hanger

However, it has certain disadvantages when compared to the other methods on this list. This approach is also rather safe to use when compared to some of the others on this list. The handle of the wooden spoon (or any similar instrument) should be used to press the cork down into the bottle of wine in order to start the wine flowing. Unfortunately, after you’ve pushed the cork into the bottle, it’s quite hard to get it out. Even if the bottle of wine is ancient, the cork may crumble and shed into the liquid when it is inserted into the bottle.

However, if you are drinking with friends and want to finish the entire bottle, there is no need to be concerned about this outcome. Pour the wine through a strainer into a decanter to remove the cork bits, and then discard the strainer.

4 – Pump It Out

This one is quite straightforward. Remove the needle from a bicycle pump and insert it into the cork. Continue to push the needle through the cork until the needle reaches the air space between it and the wine. After that, inflate the bottle with air. Because of the air pressure in the bottle, the cork should progressively slide out of the bottle as you pump.

5 – Twist It Out With Keys or a Serrated Knife

This method is similar to the first in that it involves yanking out the cork with a screw and a hammer, but it does not include a screw. For this time, however, just insert your keys or a serrated knife into the cork at a 45-degree angle and rotate the object in a circle, basically pulling the cork out of the bottle gently. Hopefully, after a few of revolutions, the cork will come out! Take care to insert your object completely into the cork, since failing to do so may result in it crumbling.

6 – Wrap the Bottle With a Towel and Use the Wall to Smack It Out

So proceed with caution when you reach this stage in the list, where things become a little more risky. Unlike the previous two solutions, which both needed at least one tool, this option may be your greatest friend if you find yourself with few resources. It’s as simple as wrapping the bottom of the wine bottle in a thick towel (or two, just to be safe) and repeatedly banging it against a wall. It is obvious that if you do this, the bottle will shatter, so consider this a last choice. Although it is unlikely that you will be able to remove the cork from a bottle on your first attempt, we recommend that you refrain from using all of your power.

7 – Slap It Out With a Shoe

This is a strategy that is similar to the last one, although it is a bit less dangerous. In order to avoid slamming the bottom of the wine bottle against a wall, place it upside down in between your thighs while sitting and slam it with your shoe instead. Despite the fact that it would take a long time, this is a safer alternative than option number 6. Remember to stop before the cork is completely removed, or otherwise you’ll end up with a little of a mess and possibly lasting stains on your hands.

8 – Apply Heat to Move the Cork Out

This is a rather far-fetched solution, but it does, in fact, work. Apply heat to the neck of the wine bottle, just below the cork, with a blowtorch or a lighter to make it easier to remove the cork. When the temperature rises over a certain point, the cork should begin to migrate upward and out of the bottle. It is important to ensure that the bottle is not cold, as the sudden shift in temperature might cause it to explode. When using a bottle that has already been chilled, allow it to sit in a lukewarm atmosphere for a few minutes before heating it up.

8 Easy Ways to Open a Bottle of Wine Without a Corkscrew

You may have the opportunity to sip a bottle of wine away from your home kitchen on occasion.

Perhaps you’re on a road trip or enjoying a picnic. In these cases, knowing how to securely uncork a wine bottle without the use of a wine bottle opener comes in helpful. To help, we’ve described the methods for 8 of the safest, most foolproof ways to open wine bottles!

1) The ScrewHammer Method

This method of opening a wine bottle is the safest and most failsafe approach available. You’ll need a screwdriver, a screw (preferably one that’s longer than an inch), and a hammer to complete this project.

  1. With the screwdriver, push the screw into the cork until there is barely a half-inch of protruding threads remaining
  2. Pulling up on the screw with the hammer carefully, as if you were removing a nail, is the next step.

You should be able to remove the cork without damaging either the wine or the cork if you are cautious with the process.

2) The Wooden Spoon Method

This approach is most effective when the wine is fresh and has little sediment. Take note that this should only be used if you want to drink the bottle completely! a wooden spoon, an external container, and a coffee filter or strainer will all be necessary.

  1. This procedure is most effective when the wine is fresh and has little sediment in its composition. Take note that this should only be used if you plan on finishing the bottle. a wooden spoon, an external container, and a coffee filter or strainer are all necessary tools.

You will not be able to retrieve the cork once you have completed the procedure; thus, ensure that the wine will be consumed completely.

3) The Bike Pump Method

It is also possible to use a ball pump or any other manual pump with a needle at the end in conjunction with the bike pump technique. You’ll need a bike pump that has a needle attached to it.

  1. Insert the needle through the cork all the way through the other end until it is completely through. In a gentle manner, gently pump the wine bottle with air to force the cork upward
  2. Once the cork has been pushed out far enough, use your hand to pull it out. You don’t want the cork to blow up in your face.
You might be interested:  How To Uncork A Wine Bottle? (Solution found)

4) The Serrated Knife Method

This approach is equally well-known for working with a conventional set of keys, although it’s a little simpler to exert mild power with the handle of a knife. You’ll need a key, a knife, or any other sharp or flat instrument to complete this task.

  1. Insert the thing into the cork at a 45-degree angle without cutting through it
  2. And Rotate the thing while dragging the cork up and out of the object as you do so.

Exert cautious force and take your time—allow the cork to rise as you spin the bottle.

5) The Towel Wrap Method

Allow the cork to come up naturally as you rotate by exerting gentle push and taking your time

  1. Wrap the bottom of the bottle with towels or fabrics to prevent it from leaking. Shake the bottle by gently tapping the bottom of it up against a wall. Repeat until the cork is almost completely depleted (taking cautious not to damage the bottle). Remove the cork from the bottle using your hand

Don’t make the mistake of trying to get everything out at once! The most important thing to remember is to move the cork a bit at a time.

6) The Shoe Method

If you’re truly strapped for cash, you can use your shoe to tap the cork out of the bottle. In order to do this, you’ll just need one rigid-bottomed shoe with some height on the sole, such as an ankle-strap dress shoe or a wedge heel.

  1. Using your shoe to tap the cork out can suffice if you are very strapped for cash. In order to do this, you’ll just need one rigid-bottomed shoe with some height on the sole, such as an ankle boot or a wedge heeled dress shoe.

Because there is less cushion than there is between the blankets, it is much more important to move carefully and with moderate effort.

7) The Other Shoe Method (Sitting Down)

You don’t have a wall, do you? Alternatively, you can be staying in a hotel with neighbors on the other side of the wall. In any case, this is a low-noise method of tapping out the cork with your shoe without generating much noise. However, you should be aware that you will need to be quite attentive about how far the cork goes with each tap on the bottle.

  1. In order to do this, you’ll need a towel, an appropriate shoe (such as the one stated above), and a chair. the bottom of the wine bottle should be wrapped in a cloth
  2. Place the bottle between your knees so that the bottom of the bottle is facing up when seated
  3. Tap the bottom of the bottle with the bottom of your shoe until you see the cork partially emerge

Before each tap, make sure the cork is still in place; the worst-case situation here is for the cork to fall out completely, resulting in the wine being spilled.

8) The Wire Hanger Method

This approach involves a small amount of additional effort, but it is a relatively risk-free way of cork removal.

  1. Unwind the wire hanger as much as you can. Make a tight winding motion with the hanger around a cylindrical object, such as a dowel or the neck of the wine bottle
  2. To use a wire hanger, just insert it into the cork in the same manner as you would a standard corkscrew. Gently remove the cork out of the bottle once it has been securely placed.

When you’re tugging, you may wish to wrap a towel around your hand to offer a better, more comfortable grip. Subscribe to the Theorem Vineyards email list today to receive wine that you can enjoy no matter where you are. Alternatively, you may discover more about our world-class wines by visiting our Wine Shop.

5 Easy Ways to Open Wine Without a Corkscrew

Includes some suggestions from John Legend, everyone’s favorite wine connoisseur. Whether you’ve lost track of your corkscrew or it’s broken (worst-case scenario), the problem always arises at the worst possible time: when you’re entertaining guests and trying to open a nice bottle of wine.I’m sure you’ve heard of 100,000 ways to open a corked bottle without a corkscrew, but maybe you’ll actually remember them if you watch John

Eating healthy should still be delicious.

Sign up for our daily email to have more excellent articles and delicious, nutritious recipes sent to your inbox. It is the Grammy Award-winning performer, who is married to model and cookbook author Chrissy Teigen, who featured in a how-to video by Tastemade that shows home cooks how to save time when they are short on time and don’t have access to a wine opener in the kitchen. In response to his rapid advice, we came up with a list of a few more shortcuts that a well-versed cook may employ in a jiffy.

They are as follows:

1) The Hammer and Screw Method:

I was recently at a funeral ceremony for a family member when someone noticed that my grandmother’s corkscrew, which was probably made in the 1960s if I’m being really honest, had jammed. I was about to excuse myself to go down to Rite Aid when my uncle astonished the entire group by opening the wine with a few home repair tools from a neighboring drawer, which I had forgotten about. The first step involved inserting a screwdriver into a cork and twisting it into place—not all the way into the bottle, but just enough to ensure that most of the screw was outside the cork.

2) The Shoe Method:

If you want to get this look, you should wear a shoe with a higher profile so that it reaches your ankle, as well as a shoe with a raised sole. A good example would be a pair of leather loafers that a male may wear to work. Ensure that any wrapping surrounding the cork has been removed before inserting the cork into your shoe. Smack the shoe against a strong wall a few times while holding the shoe to the bottom of the bottle. You’ll see that the cork is slowly edging its way out, and you’ll be able to gently pry it out.

3) The Car Keys Hack

Your vehicle keys are an innovative technique to wriggle out a cork in a matter of seconds, thanks to their unique shape. If you insert your car key at a slight angle into the cork, leaving just a small portion of the key outside of the cork itself, you can use the top of your car key to push the cork clockwise and up and out of the bottle. If you insert your car key at a right angle into the cork, you can use the top of your car key to push the cork clockwise and up and out of the bottle. Turning it in circles while also pulling it up at the same time is essential in this exercise.

4) The Serrated Knife Trick

It takes only a few seconds to wriggle the cork out of your vehicle keys, which is rather brilliant. If you insert your car key at a slight angle into the cork, leaving just a small portion of the key outside of the cork itself, you can use the top of your car key to push the cork clockwise and up and out of the bottle.

If you insert your car key at a right angle into the cork, you can use the bottom of your car key to push the cork clockwise and up and out of the bottle. Turning it in circles while also pulling it up at the same time is essential in this situation.

5) The Wire Hanger Technique

And you were under the impression that you could only unclog drains with unwound hangers, to be honest. A spare wire hanger twisted into the shape of a corkscrew may be used to quickly wriggle the cork out of the bottle with a few rapid twists, if you have one lying around. For those of you who have managed to shred your cork into fragments and send them pouring into the wine itself during your DIY opening escapades, here’s a last-minute solution for you: strain your wine over a coffee filter.

13 Clever Hacks On How To Open A Wine Bottle Without A Corkscrew

Your most-loved software is now available. The corkscrew is missing from the bottle of wine that you’ve been thinking about for days, and you notice it as soon as you open the wine bottle. You may find yourself wondering, “How do I open a wine bottle without an opener?” There are several methods for opening a wine bottle without the use of a corkscrew. To press the cork down, you may use common household things such as a wire hanger, a key, scissors, or even a wooden spoon to accomplish so. Before you start squandering that bottle of wine out of aggravation, take heart in the knowledge that you may safely practice these tried and true tactics in the comfort of your own residence.

The Best Corkscrew Alternatives

The following are the many objects and tools that you’ll require in order to open a wine bottle without the use of a corkscrew. You should keep in mind that you only require one item at a time, or whatever you can get your hands on at the time.

  • Bike pump, screw (normal or with hook), hammer, wire hanger, paper clip, serrated steak knife, a key, and a pair of pliers are all useful tools. The following items: Crucible tongs
  • A lighter or blowtorch
  • A clean shoe or leather loafer
  • A rope or shoelace scissors
  • Champagne saber sword
  • Wooden spoon
  • A pair of scissors

How to Open a Wine Bottle Without a Corkscrew

Screws are quite simple to come by at home, and if you’re lucky, you’ll come across a screw that has a hook on the end, similar to the type used to hang picture frames. As a result, you’re just replicating how a corkscrew works, making it the simplest and most successful technique available. a.) It’s as simple as screwing the picture hook into the cork and wriggling the cork out; it couldn’t be simpler. You can lock the screw beneath the cork with the underside of a hammer and then pull the cork out if you have a conventional hookless screw.

2. Using aWire Hanger

When it comes to finding screws at home, you’ll be surprised how many you’ll come across. If you’re lucky, you’ll come across a screw that has a hook, similar to the type used to hang picture frames. You are simply replicating the way a corkscrew works, and it is by far the most successful method available. To remove a cork from a bottle, just screw a picture hook into the cork and wriggle the cork out. You can lock the screw beneath the cork with the backside of a hammer and pull the cork out if you have a typical hookless screw on hand.

3. No Hanger to Spare? UsePaper Clips

If ruining a perfectly excellent hanger is out of the question, paper clips can be used for the hangers. It’s the same premise as with the hanger, but this one necessitates a higher level of accuracy. a.) Gently straighten two paper clips, focusing on the central portion of each. Don’t make the U forms too straight on either end. To insert a corkscrew, slide one between the cork and the bottle’s side, and then repeat the process on the other side of the corkscrew. Using your fingers, press down until the U-shape is just below the cork.

• d.) Attach the remaining two U-shapes to the bottle’s exterior wall. You may secure the hooks together with a pencil or by tying them together in a tight knot. Then slowly draw the clips up, making sure that the cork is also being pulled up. While pushing it up, give it a couple of twists.

4. Bring Out YourSerrated Knife

Needless to say, extreme caution must be exercised while using this procedure. A knife that can readily fit into the neck of the wine bottle should be sought after. Any small or pocket knife will suffice, but a serrated knife will offer you the best chance of success since the blade will grab the cork more tightly while cutting it. To do this, carefully insert the blade into the cork. Afterwards, gently rock the knife back and forth without exerting excessive downward effort. Continue to do so until the knife has completely penetrated the cork.

Please take care not to get any cork fragments into your glass of wine.

5. That’s the Key!

You may use your key to pop the cork out of the wine bottle in the same way that you would with a serrated knife. We recommend that you use a key that you have many copies of in case you apply too much force and break the first one in the process. 1. Insert the key at a 45-degree angle into the cork and turn the key. To twist the cork out gently, carefully move the top of the key in a circular motion. c.) After a few of spins, the cork should come out. If not, be certain that the key is correctly inserted into the cork because if you don’t, the cork may disintegrate within, making it difficult to push it out later.

6.Bike Pump

This one makes use of some fancy science, but it’s actually rather simple to put together. All you need is a bike pump or any other type of air pump with a needle attached to get started. In order to properly cork a bottle of wine, you must first plunge the needle into it completely, until the needle reaches the air space between the cork and the bottle of wine. b.) Gently pump air into the bottle until it is completely full. As you pump, the air pressure in the bottle should cause the cork to gently slide out of the bottle.

7. Heated BottleTongs

This technique was developed in Portugal as an alternative to opening very ancient bottles of wine with corks that were crumbling due to the passage of time. Keep in mind that this involves extremely high heat and broken glass. You’ll need a pair of bottle or beaker tongs that are metallic and preferably rounded in shape. a.) Heat tongs until they are smoking. b.) Wrap them around the neck of the bottle, just below the cork, and secure them in place. c.) Hold the tongs in place for approximately 10 seconds.

d. Make sure you don’t burn your skin when doing this. Remove the top of the container with a thick cloth or a pair of gloves. Use a sieve or other filter to pass the wine through to eliminate the possibility of consuming the glass.

8.Blowtorchor aLighter

As an alternative to opening very old bottles of wine with corks that were crumbling due to age, this method was developed in Portugal in the late 1800s. This involves extreme heat and broken glass, so take precautions! Bottle or beaker tongs, ideally rounded, in a metallic finish will be required. tongs until they are completely black. Then, just below the cork, wrap them around the bottle’s neck and secure them with a twist tie. Allow for approximately 10 seconds with the tongs in place. A brush or kitchen towel can be used to gently massage some cold water into the neck.

To do this, use a thick towel or pair of gloves to break off the top of the jar.

9. TheShoeApproach

Despite the fact that this is a widely used solution, it may appear to be a ridiculous way to handle the cork problem to people who haven’t heard of it before. A shoe with a higher profile, such as one that reaches your ankle, or a shoe with a raised sole are the ideal options for this. An excellent example would be a pair of leather loafers. Please keep in mind that this procedure demands patience as well as a little physical power. a.) Remove the protective cover from the wine bottle and check to see that there is no plastic or foil covering the cork.

  1. Holding the drink in one hand and the shoe in the other is a good strategy.
  2. Repeat the process numerous times.
  3. Keep the bottle from shattering by hitting it with your shoe, but don’t knock it too hard.
  4. You may simply take the cork out of the bottle with your fingers once it has moved out of the bottle by about an inch.
  5. Here’s a little video to get you started:
You might be interested:  How To Make Your Own Wine? (Question)

10. TheStringTheory

No, not the theory that attempts to explain the origins of the cosmos. This method of opening a wine bottle without a corkscrew makes use of a string or a shoelace to achieve the desired result. A figure-eight knot may be tied and then slid beyond the cork using a screwdriver or scissors, which will keep it from slipping. b.) Insert the string inside the bottle so that it is just below the cork surface. c.) Tilt the bottle so the knot is below the cork and then draw the thread to tighten it.

11. TheScissorTechnique

This approach is quite similar to the key method, but it necessitates a greater level of precision and control. As is always the case, use caution when handling the blades! a.) Purchase a pair of small craft scissors or a pair of scissors designed for children (but not those safety scissors with plastic). b.) Hold the handles of the scissors in your hands and fully open them. Once again, stay away from the blades’ sharp edges. c.) Carefully apply a small amount of pressure to the scissor blade and push it halfway into the cork.

The bottle should be held securely in one hand while simultaneously twisting the handles of the scissors in the other.

Keep the handles of the scissors stationary and use the bottle to twist the scissors instead.

f.) If you have the scissor blade buried deep enough in the cork, the cork will pop out on its own accord. The cork will come out far enough that you will be able to take it out by yourself if you do not do so.

12. Using aSwordor a Big Knife

Sabrage demands a high level of skill and is fundamentally different from simple hacking. It is frequently seen at joyful events such as weddings (most commonly on champagne bottles) and other special occasions. A sword is not a regular household item, yet it is being used to open a wine bottle, according to official documentation. If you find yourself in a position where you don’t have access to a corkscrew and you happen to have a sword on hand, here’s how to use it: a.) Allow the bottle to cool.

  1. b.) Locate a free and open space.
  2. c.) Wipe away any excess moisture from the bottle and carefully remove the foil and wire basket from the bottle.
  3. It is the point at where the two halves of the bottle come together.
  4. The bottle should be held at a 30-degree angle, with the seam pointing upward and the cork slightly higher than the bottom of the bottle.
  5. This means that the blade’s dull edge should be pointing toward where the cork will be placed.
  6. To strike the annulus, make a single hard and confident stroke with the sword, sliding it down the seam and hitting it.
  7. Check the neck of the glass for any shards and wipe them away with a clean cloth, as needed.

13. Push the Cork Down with aWooden Spoon

Finally, if you’re having trouble getting the cork out, why not just press it in? If you’re not against drinking wine with a cork floating in it, this is the quickest and most convenient method. This approach is most effective for rubber corks or corks that are less than a decade old, because a vintage bottle of wine will almost certainly have a cracking cork. a.) Using the back of a wooden spoon, press down on the centre of the cork with constant pressure until it breaks. The base of the aperture should be held steady and tightly in your hands.

c.) The cork should be pushed all the way into the bottle’s interior.

Conclusion

Not interested in experimenting with these ingenious hacks? Check out our Electric Wine Bottle Opener Reviews and Buying Guide for more information. This list of smart tips on how to open a wine bottle without a corkscrew will help you get past that final obstacle to drinking your favorite wine, whether it’s an emergency situation or you’ve simply grown weary of using corkscrews in the first place! Meanwhile, you may learn how to correctly handle a wine glass and which wines to choose for your mini-bar to enhance the enjoyment of your drinking experience even more.

Do you know of any more innovative methods for opening a wine bottle without the need of a corkscrew? Please share your trick in the comments section.

10 Absolutely Ingenious Ways to Open Wine Without a Corkscrew

In most cases, unless you like boxed wine, the cork on your wine bottles will be replaced with a screw cap, the latter of which should not be frowned upon, especially if the wine is white. However, most wineries still prefer corks over screw caps, which means you’ll need a corkscrew to open your bottles of wine. Even if your corkscrew has gone misplaced or is not readily available, there are a variety of other methods for opening the bottle that will not introduce microscopic cork crumbs into the wine.

  • Don’t Miss: 50+ Ingenious and Totally Crazy Ways to Open a Beer Bottle

1. Use Some Tools

If you can locate a toolbox, you should be able to open a bottle of wine using a screw, a screwdriver, and a hammer without difficulty. Insert the screw into the cork and tighten it down with the screwdriver until it is secure. Leave approximately one inch of the screw exposed at the top of the cork. Afterwards, take your hammer and, using the end (rather than the head), you may pry both the screw and cork out of the bottle itself. (This method works better with larger screws that have large threads).

If you don’t have any screws, you can use a large number of nails.

2. Push It with a Wooden Spoon

According to Food Mob Bites, a wooden spoon with a long, thin handle is the ideal instrument for shoving the cork directly into the bottle and releasing the trapped wine sediment. Apply pressure to the top of the cork, removing any foil covering that may have been there. With a little force, it should pop free and slide into the bottle without leaving any cork crumbs behind.

3. Yank It Out with String

Alternatively, if you do not like the thought of having a cork inside the bottle, there is a technique to get it out after you have pushed it into the bottle. Tighten a piece of string into a figure-8 knot and insert it into the neck of the bottle, knot first. Tilt the bottle to one side to provide some leeway, which will allow your knotted thread to glide past the cork and into the bottle neck. Finally, pull up on your string as hard as you can—the knot will wedge against the neck of the bottle on the bottom of the cork, forcing the cork to rise and come out of the bottle!

4. Use a Wall to Pop It Loose

If you’re in a hurry and don’t have any equipment to open your wine, simply wrap the bottle in a towel and slap the bottle open. Wrap the bottle of wine completely with the towel, making sure that both the sides and the bottom are covered. Use a rhythmic banging action to move the bottle’s base against a wall, pushing it in a horizontal direction. Rinse the bottle several times until the cork begins to come loose. Then yank it out! If the surface is strong enough, you can use anything from a brick wall to a coffee table for your project.

When a towel is not readily available, you can alternatively remove one of your shoes and use it as a drying towel.

But be sure to buy a flat shoe with cushioning on the inside, because otherwise one powerful whack might easily burst the entire bottle apart! Alternatively, you could simply use a book. If you don’t have access to a wall, a tree can serve the same purpose.

5. Slap It Out, No Wall Required

If you’re concerned about causing damage to a wall or door, you don’t need it. You can still slap the cork out of the bottle with little more than your legs and a shoe on your feet. Get comfortable and insert the bottle between your thighs, upside-down, between your thighs. Hold it firmly in place while you strike the bottom of the bottle with the flat sole of your shoe in an even, even pattern. Continue to smash the wine bottle until the cork starts to come loose. When the cork is poking out of the bottle far enough to be grabbed, use your hand to yank it out with it.

6. Add Pressure with a Bike Pump

Do you happen to know of a bike pump nearby? Although most likely not, it is a novel instrument to utilize for a unique wine-opening procedure, as demonstrated by Kristy Kreme in her video on YouTube. Insert your bicycle pump into the cork and start pumping. By forcing air into and through the cork, you will build up enough pressure to cause it to fly out of the bottle.

7. Unlock the Cork with Your Car Keys

Grab your vehicle keys because, according to Kent Yammo, you can wriggle out a wine cork with just one metal key. As seen in the video, insert your key into the cork at a 45-degree angle until the majority of the key is in the cork. Then, while drawing up on the key, rotate it in circles so that the cork begins to screw upward and ultimately twists free of the neck.

8. Just Stab the Cork Out with a Knife

In the event that you’ve run out of keys and have attempted the various techniques described above, it’s likely that you have a knife of some sort handy. Although a serrated knife is preferred, any knife may be used to wriggle a wine cork out, just as you would with the key approach. Stick the knife into the cork and slowly move it in a twisting motion, as CrazyRussianHacker illustrates. Pulling up on the cork will cause it to begin to rise as you twist it. To thoroughly remove the cork from the bottle, stab it on its side and flip it until it is totally free of the bottle.

9. Slice It Off

If you’re sipping sparkling wine or champagne, you can employ the (slightly risky) method of slicing off the cork and a little piece of the glass to get a better taste. This trick is known as sabrage, or sabering, and it is performed with a saber, sword, or machete, depending on the situation. Obviously, this should only be used as a last option, but Alton Brown demonstrates how simple it can be when done correctly. For those with sufficient talent, a spoon may be substituted. When you’ve mastered the art of sabering, consider investing in a wine saber Champagne sword to elevate your level of sophistication.

10. Heat It Up

If you have a cheap bottle of wine and want to get yourself all warmed up for the winter, you may create some impromptu mulled wine with the correct mulling spices using the wine. To remove the cork from the bottle, bring some water to a boil, remove it from the heat, and place the bottle in it. The cork will gently but steadily emerge on its own!

Once the bottle has been opened, drain the water and pour the wine into the saucepan to finish cooking. Add your mulling spices and heat it through. Simmer for a few minutes, then serve. If you have a blowtorch, you can use it instead of boiling water if you have one (which you should).

Here’s a Toast to Our Hard Work!

It’s a lot more work than just using a corkscrew to open a bottle. Perhaps next time you might consider investing in a wine travel bag or picnic basket and accessories. Alternatively, amaze your guests with a poshRabbit wine opener or a high-techautomatic corkscrew that is both stylish and functional. It’s possible that after you’ve drank a few bottles of your specially opened wine, you’ll have enough corks left over to do some creative repurposing. If the wine, on the other hand, isn’t quite up to par, we have some suggestions on how to improve its flavor without the use of any special equipment.

Do you want to learn how to use Microsoft Excel and improve your chances of landing a job working from home?

Purchase Right Away (97 percent off) Other great discounts to consider are as follows:

  • The Ultimate 2021 White Hat Hacker Certification Bundle is now on sale for 97 percent discount. The 2021 Accounting Mastery Bootcamp Bundle is now on sale for 98 percent discount. The 2021 All-in-One Data Scientist Mega Bundle is available for 99 percent discount. XSplit VCam: Lifetime Subscription (Windows) is available for 59 percent discount. The 2021 Premium Learn To Code Certification Bundle is available for 98 percent discount. MindMaster Mind Mapping Software: Perpetual License is now on sale for 62 percent discount. NetSpot Home Wi-Fi Analyzer with Lifetime Upgrades is available at 41 percent discount.

Image courtesy of Foodbeast and YouTube.

10 Ways to Open A Wine Bottle Without a Corkscrew

1/11Handyman for the Family

Hardwire a Fix with Some Hardware

One method of learning how to open a wine bottle without a corkscrew is to drill a screw into the cork and remove it by pulling it out with a hammer, which is described here. A loose screw can be used to extract a cork from a bottle in a pinch if you happen to have one lying around. Simply screw it into the cork’s center with a screwdriver or drill to secure it in place. Allow enough space for the back of a claw hammer to be used to pry it out. Discover the most effective method of storing wine glasses.

Use a Shoe

Another method of learning how to open a wine bottle without a wine opener is to use a little push on the wine bottle. Unleash your aggravation at having forgotten or misplaced a corkscrew by knocking the cork out of the bottle with a shoe or any other object that will assist absorb the force of the bottle hitting a hard surface. It is important to note that this approach only works with real corks, not the plastic variety, and that you cannot use a shoe with excessive cushioning. When a liquid is contained in a container, it behaves like a solid, and the cork will ultimately be forced out by the wine.

3/11

Open Wine Bottle With a Key

Placing a key at a 45-degree angle into the cork until the majority of the key is firmly seated in the cork will ensure that the cork will not burst apart. Then begin twisting the cork up while simultaneously pressing up with the key until the cork comes out. Because a weak key has the potential to shatter, extreme caution should be exercised. Learn how to build a wine rack to provide you a place to keep your bottles of wine. 4/11

Hang on with a Hanger

Using a pair of pliers, mold a hanger into the shape of a hook for use as a keychain. Place the new hook on the edge of the cork, with the u shape pointing up, so that it is flush with the cork.

Wiggle the hook back and forth until it’s approximately 2 inches below the surface of the water. Rotate the hook so that it captures the bottom of the cork, and then begin tugging as soon as the cork catches the bottom of the hook. With some PVC pipe, you can make a simple wine rack repair. 5/11

Cut the Cork

Remove the cork by making a tiny incision on either side of it and locating a clean pair of curved nail scissors or a pair of pliers. Insert the nail scissors or pliers into the hole where the cork was cut and pull them out of the hole. Build a bar in your home that is inspired by what other people have done to entice guests to return. 6/11

You might be interested:  What Happened To Bartles And Jaymes Wine Coolers? (Best solution)

Slide in Some Scissors

Locate a pair of scissors and stab one of the blades into the cork with the other blade. To remove the cork, twist the cork out while holding one of the scissors’ handles in your hand. Make careful to work gently in order to avoid any possible injuries. Prevent future wine-opening snafus by learning how to properly cut glass. 7/11

Pump it Up

It’s possible that we enjoy this one the most because it produces a pop sound if done correctly. First, fill the wine bottle halfway with a bike pump and insert the pump needle between the cork and the rim of the bottle. Pump it three or four times, but be cautious not to pump too hard since the bottle may explode if you pump too hard. After a few of pumps, the cork will leap out, or you may pull it out yourself with your fingers. If you’ve spilled some wine on your vinyl flooring, you’ll want to know how to get the stains off.

Use a Screw Hook

Insert a screw hook into the cork and pull it out once it has been securely screwed in. When you open a bottle of wine in the future, you won’t have to spend as much time looking for a wine opener. With these 15 home bars, you may get some inspiration for how to construct a bar. 9/11

Find a Knife

As you twist, gently apply upward pressure to the cork with the serrated knife that you inserted between the cork and the bottle. Because you’ll be using a knife, you’ll want to proceed with caution. Once you’ve opened the bottle of wine, you should consider constructing a bar to keep essential items like a corkscrew. 10/11

String it Together

To ease the knot past the cork, use a screwdriver or scissors to wedge the knot into the cork. Tilt the bottle until the knot is below the cork, and then pull the thread to release it. Check out these instructions on how to remove a stain off a plastic tabletop if you ever find yourself in this situation. 11/11

If all Else Fails, Just Push the Cork in

The cork may be pushed in with your finger up until the point at which you need to discover another object to complete the task. To make the cork move, mark it with a marker or write on it with a pen. Although there will be a cork swirling around in your bottle of wine, a fast glass of chilled cabernet will quickly forget about it. Learn how to construct a pub shed for entertaining friends over a glass of wine. The original publication date was August 13, 2019.

6 Weird Ways to Open a Bottle of Wine

It’s a horrible scenario that we’ve all found ourselves in at some point: you’ve got a bottle of wine that you’d want to drink, but you don’t have a corkscrew with you. Professional bartenders and wine professionals shared their greatest wine bottle techniques in the spirit of MacGyver. These are the six suggestions they have for you.

1. Shoe or Boot

“Without mentioning sabering, the shoe technique is the strangest method I’ve ever opened a bottle,” says Vince Stilletti, the manager of The Red Hook Winery in Brooklyn, New York. “What was more stranger was that it happened in a hotel in Italy, where you’d assume they’d have wine keys in every room,” says the author. According to Stilletti, the procedure goes as follows. In order to do this, he suggests removing the foil and any caps off the top of the bottle and inserting the bottom of the bottle into a shoe where your heel would normally be.

Locate a sturdy wall or beam and align your shoe and bottle with it so that the shoe is upright and the bottle is horizontal, as shown below.

It will take time, but ultimately the force will gradually push the cork out of the neck until it is large enough to be removed with your hand.

“I adore the expressions on people’s faces when they see you perform the shoe trick; it’s almost as if they don’t expect it to work, but it does,” she explains.

In the summers when she worked as a camp counselor and didn’t have access to an opener, she would wrap the bottle in a towel and bash it against a tree. “It was successful.” It’s important to utilize a firm, level surface and avoid tapping too hard, or else things may go wrong.

2. Ballpoint Pen

Despite the fact that Lauren Darnell, a bartender and spirits specialist based in Seattle, has personally used the shoe technique in the past, she says that a ballpoint pen can suffice in a pinch. In one instance, I used one to whittle away at the cork, and then I squeezed through a T-shirt with the other.” She goes on to say that while it wasn’t really a career highlight, it did get the job done, and sometimes that’s all that can be asked of you. According to beverages writer Taylor Tobin, you can also just press the cork into the bottle with a Sharpie to get the same result.

3. Tweezers

Proficient in the field of California spirits Record recalls using a colleague’s “extremely expensive tweezers as an Ah-Soon a train from Paris to Reims” when he was younger. Strangely enough, there were no French people on the train who were in possession of a spare wine key. The tweezerman Ultra Precision tweezers belonging to a colleague were put to use to extract the cork, says the man who went to work. The wine was wonderful, and we were rewarded for our efforts after a few terrifying minutes.

4. Long Screw and Hammer

Here’s a short advice from marketing and beverages specialist Kirti Dwivedi on how to make your own homemade corkscrew: According to her, “insert a fairly long screw through the cork.” In order to make wine, use the claw portion of a hammer to pull on the screw and—ta-da!—there is wine.

5. Bicycle Pump

The bike pump approach is a personal favorite of Houston bartender Christopher Huang. To use the inflator needle, he recommends inserting it all the way through the cork and pumping away. He has personally attempted it. “I was pumping with a bike pump that I was holding between my feet, and I just stopped pushing when the cork edged out halfway. Moreover, it didn’t take too many pumps to get the desired result.”

6. Hot Fireplace Tongs and Snow

The port tongs approach, according to New York City bartender Nick Venditti, can be recreated with hot fireplace tongs and some good, old-fashioned snow. When I visited my parents’ house upstate, there was no corkscrew available, but there was a wood-burning furnace, so I utilized this instead.” he explains. “I heated the tongs until they were red hot, then wrapped them around the neck of the bottle and carried it outdoors, where I instantly piled snow around the neck.” It cracked in a uniform manner along the neck line.

How to Open a Wine Bottle Without a Corkscrew: 10 Methods

Paul has been a long-time admirer of the grape, and he particularly enjoys a glass of La Rioja, Cabernet Sauvignon, or cava when the occasion calls for it. Please continue reading if you’re interested in learning how to open a wine bottle without using a corkscrew. Pixabay has a public domain image that you may use. When most wine enthusiasts find themselves at a social gathering, on the beach, by the pool, or cruising on a boat with a bottle of their favorite wine, they quickly realize that they don’t have a corkscrew to remove the cork from the bottle they’ve brought with them.

Following is my list of methods for uncorking a wine bottle, which is presented in no particular order. In general, you should always remove the wrapping off the cork before proceeding with any of these procedures, unless otherwise specified.

10 Ways to Open a Wine Bottle Without a Corkscrew

  1. Push the cork down
  2. Hammer and Screw Method
  3. Hook and Pen Method
  4. Shoe Method
  5. Slap Method
  6. Key (or Knife) Method
  7. Push the cork down Remove the cork from the bottle
  8. Method involving knots and strings
  9. Using a blowtorch to provide heat
  10. The Scissors Method

I go into greater detail about each method further down on this page.

1. Push the Cork Down

Any piece of silverware or long blunt instrument with a thin enough handle or grip to fit down a bottle can theoretically be used, but I’ve found that the end of a wooden spoon works the best. Simply press the cork down into the bottle until it is fully submerged. It requires time and effort, but it is usually considered to be trustworthy. However, there are certain disadvantages to using this method: First and foremost, as you press the cork down, the wine tends to spill out, resulting in a sloppy mess if you’re not cautious.

Third, sometimes a wooden cork (not a plastic cork) can crumble under the pressure of the wine, resulting in little pieces of cork floating around in the wine.

Fourth and most importantly, you must use caution.

As a result, I would refrain against utilizing anything sharp, such as a knife, in any situation when possible.

2. Hammer and Screw Method

This method simply entails pushing a screw into the cork and then pulling it out with the “claw” of a hammer, which is what gives the process its name. In my opinion, it’s a rather basic and dependable procedure, although it does need you to have access to a few common home instruments. If you can also locate a screwdriver, that is even better since you may use it to screw (rather than drive) the screw down into the cork, resulting in an even firmer and simpler removal of the screw. If you don’t have access to a claw hammer, a pair of household pliers can be used to grab the screw and take out the cork if the situation calls for it.

3. The Hook and Pen Method

You will need to locate one of those screw-in wall hooks that are pretty prevalent in many homes in order to accomplish this. It’s possible that one is laying around in a drawer, or that you may “steal” one off the wall by unscrewing it from the wall. In order to use this approach, you must screw a hook into the cork and then slip a pen through the hook and use the pen as a grip. After that, you may remove the cork by performing a similar motion to that of a standard corkscrew, such as pulling the cork out with your fingers.

4. The Shoe Method

This strategy may not appear to be a logical answer at first glance, but I can guarantee you that it is effective. Once you’ve removed the wrapping from the cork, you’ll want to put the base of the wine bottle into a shoe. After that, while holding the bottle in place, you smack the bottle and shoe against a hard wall many times, allowing the cork to eventually come out. Instead of using a shoe, a towel may be used to wrap around the base of the bottle as an alternative to this procedure.

Anything that provides enough cushioning to prevent the bottle from shattering without completely absorbing the shock when it is slammed against a wall would suffice. If you don’t have a wall to smash against, you can use a tree as a makeshift wall.

Read More From Delishably

There are some parallels between this approach and the shoe method described above, but it does not need you to strike the bottle against a wall or a tree. As an alternative, you may turn the wine bottle upside down and tightly grasp it between your legs, after which you can smack the base of the bottle from above with a shoe, flip flops, or a used book. Once the cork is loose enough to be pulled out with your hands, you may remove it.

6. Key (or Knife) Method

Insert a key into the cork; it might be your house or vehicle key, or anything else that is readily available. You must enter it at a 45-degree angle in order to have optimum impact. Then you must twist the bottle while gently pulling on the cork to gradually detach it from the bottle. A variation on this approach involves inserting a knife instead of a key, however doing so needs extreme caution due to the risk for injury. The exercise should definitely not be tried if you have already drunk alcohol!

7. Pump out the Cork

This approach is arguably one of the most entertaining available. All you need is a bicycle pump to get started (okay that is probably a big ask in most situations). Start pumping after wedgeing the pump into the cork with your finger. The air will enter the cork and travel through it without being absorbed. Eventually, the pressure rises to a point where it is sufficient to force the cork out. I’d never heard of this strategy before I came across it while doing research for this blog, but I can guarantee you that it is effective!

8. Knot and String Method

A screwdriver, or similar long thin metal object, as well as a thick piece of string or rope, will be required for this procedure to be successful. To begin, use a screwdriver to create a hole in the cork and insert it into the bottle. After that, tie a knot at the end of the string and use the screwdriver to force the knotted end of the string down the hole. With the string, you may tug the cork out of the bottle. Using this approach will involve a significant amount of physical strength and effort; it is not one of my favorites, but it is worth doing if you just have a screwdriver and piece of string at your disposal.

9. Apply Heat With a Blowtorch

This approach is a little out there, but it works (I haven’t tried it myself, but I have seen others do it successfully). It necessitates the utilization of a blowtorch. This approach can be risky because if heat is added to the bottleneck below the cork, the air expands and forces the cork out. A cold bottle can easily burst if subjected to a quick temperature increase, therefore be cautious when using this method. As a result, the bottle should be moderately warm when it is first opened.

10. Scissors Method

Another way that, while it necessitates extreme caution, is effective is the scissors method (be careful not to lose any fingers in the process!). Using a pair of scissors, spread the blades apart and stab one of them deeply into the cork. Holding the scissors by the handle, twist and draw the scissors slowly and steadily. This move should loosen the bottle cork.

Prevention Is Better Than Cure

Of course, the best approach to ensure that you are never caught out is to always keep a corkscrew on hand. That isn’t nearly as complicated as it appears. Everywhere I go, I carry aVictorinox Swiss Army Multi-tool Pocket Knife, which is made by Victorinox. The corkscrew used to be kept in the center console of the car, but I eventually moved it to my key ring, so that I’m never without one (and many of the other tools have proven to be really handy over the years!). If you’re going to purchase a Swiss Army Knife with the intention of opening wine, it’s worth spending a little more money, in my opinion, because the corkscrew tool on the cheaper pocket knives is frequently broken.

There are also some excellent key chain wine-opening tools available that are only dedicated to unscrewing bottles.

Another piece of advice is to always carry a corkscrew in your car when traveling; the glove box, center console, or trunk are all ideal locations to keep a bottle opener.

While the information contained within this article is factual and truthful to the best of the author’s knowledge, it should not be used as a substitute for formal and personalized counsel from a competent expert. Paul Goodman was born in the year 2018.

Leave a Comment

Your email address will not be published. Required fields are marked *